Forest 2.4M ULTIMA PERGOLA Kit Instructions

Advertisement

Making British gardens great
2.4M ULTIMA PERGOLA
KIT INSTRUCTIONS
We recommend using the following tools (NOT SUPPLIED):
Tape
Measure
It's vital that you build your new pergola on a level ground in your desired location.
FIXING PACK CONTAINS:
5 x 60mm Screws
QTY: 24
PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN
IMPORTANT
Assembly requires 2+
adults.
THE ROOF OF THIS PERGOLA IS NOT A LOAD BEARING STRUCTURE
Missing something or need more information?
Call our aftersales team on
0333 777 7089
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
Pozidrive
Drill & 2mm
Screwdriver
Drill Bit
Hammer
3.5 x 25mm Screws
QTY: 48
REMINDER
Always pre-drill before
screwing.
Visit our website for spare instructions and
more information
www.forestgarden.co.uk
ISSUE: 0221
FIXING PACK CODE: UPERG24FP
Ladder
Spirit Level
U-Brackets
QTY: 12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2.4M ULTIMA PERGOLA and is the answer not in the manual?

Questions and answers

Summary of Contents for Forest 2.4M ULTIMA PERGOLA

  • Page 1 THE ROOF OF THIS PERGOLA IS NOT A LOAD BEARING STRUCTURE Missing something or need more information? Visit our website for spare instructions and Call our aftersales team on more information 0333 777 7089 www.forestgarden.co.uk Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB...
  • Page 2 PREPARATION We strongly advise that you anchor your pergola down with either fixtures shown below to enhance stability. You will need to purchase these separately. Apply each fixture to each leg before fully constructing your pergola. 130mm of your post will be supported within the fixture. FOR GRASS/SOIL (SOFT SURFACES) Easy-Fit Fencefast...
  • Page 3 SCREWS Place the assembled roof onto the notched posts. Ensure post is distanced 1650mm from each other if using fixtures. Carefully knock the rafters into the notches. Fix together using 2 x 60mm screws per post. SCREWS Secure each angle brace with 2 x 60mm screws. Use the visuals above as guidance. CHECK YOU HAVE ALL YOUR PARTS.

This manual is also suitable for:

Uperg24fpUperg24

Table of Contents