Table of Contents
Advertisement
4. How do I perform a Factory Reset via the Online Device Management Portal?
Using the Mobile Hotspot
open the Mobile Hotspot Online Portal (https://192.168.0.1, or, http://192.168.0.1). Select About >
Backup and Restore and Click Restore Factory Defaults.
5. I cannot connect to Wi-Fi after changing Wi-Fi password.
Your Wi-Fi devices save the previously used Wi-Fi names associated with the passwords used to
access the Wi-Fi name. When you change the Wi-Fi password only for your W01 Arch and keep the
same Wi-Fi Name, the devices try to connect to your W01 Arch using the Wi-Fi name and previous
Wi-Fi password saved, causing Wi-Fi authentication error.
6. I cannot access the https://192.168.0.1.
Ensure that a Wi-Fi connection is enabled on your device and that you have selected the correct Wi-
Fi name (SSID) for your W01 Arch connection. Also, make certain that you are entering the correct
full URL address as https://192.168.0.1. If this URL address does not work, try the IP address
http://192.168.0.1.
7. I cannot access the https://192.168.0.1.
Ensure that you are entering the correct password for the Device Management Online Portal. The
default password for the Online Portal is "admin" unless you have changed previously. If you have
forgotten your password, reset your device by following the Device Reset steps with the Reset pin
hole.
Reset
Online Device Management Portal
: Connect to your W01 Arch and then
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Arch W01 and is the answer not in the manual?
Questions and answers
Does the Atel Arch 4G LTE Hotspot ALM-W01 BLOCK Ads?
Can ATEL Arch 4g LTE hotspot work with 5g Verizon sim card?
The ATEL Arch W01 is a 4G LTE mobile hotspot. The provided information does not confirm whether it supports 5G Verizon SIM cards. However, since the device is designed for 4G LTE connectivity, a 5G SIM may work but will likely be limited to 4G speeds.
This answer is automatically generated