System Setup - Harvest TEC HayBoss G2 600A Operation Manual

System Setup

1. To view moisture from the 600A Moisture Sensor begin setup at the main baler screen. Select the
WRENCH icon (arrow A) which is the fourth icon down on the right side of the screen-the right menu.
2. The service screen displayed below should appear. Select the Next Screen icon (arrow B) located at the
bottom of the right selection menu.
3. A similar screen will appear with a different menu options on the right side of the screen. Press the A B
icon (arrow C) located at the top right of the selection menu.
6
A
B
C