Installing The Jd-800 Model Expansion; Uninstalling A Model Expansion - Roland JUPITER-X Owner's Manual

Using the JD-800 Model Expansion

Installing the JD-800 Model Expansion

Getting the file ready
* When using a USB flash drive for the first time, you must format it
on the JUPITER-X/Xm .
Ø "Formatting a USB Flash Drive" (Owner's Manual)
1 .
Connect the USB flash drive to your computer .
2 .
Save the file (EXM005_JD800 .exz) to the root
directory of the USB flash drive .
3 .
Disconnect the USB flash drive from your computer .
Installing on the JUPITER-X/Xm
1 .
Insert the USB flash drive you prepared in "Getting
the file ready" into the JUPITER-X/Xm .
2 .
Turn the power of the JUPITER-X/Xm on while
holding down the [ENTER] button .
The EXPANSION top screen appears .
List of installed Model Expansions
Uninstall Install
(PAGE [<] button) (PAGE [>] button)
3 .
Press the PAGE [>] button to go to the installation
screen .
4 .
Use the PAGE [ä] and [å] buttons to select "EXM005
JD800," and press the [ENTER] button or the PAGE
[>] button .
A confirmation message appears .
If you decide to cancel, press the [EXIT] button .
MEMO
The user license registration screen appears if you're installing for
the first time .
To continue installing, use the PAGE [>] knob to select "OK, " and
then press the [ENTER] button .
4
Memory used
EMPTY:
A new file can be installed .
FULL:
A new file cannot be installed .
You must free up some memory
for installation .
Ø "Uninstalling a Model Expansion" (p . 4)
5 .
Use the PAGE [>] button to select "OK," and press
the [ENTER] button .
6 .
Turn the power off, then on again .
This allows you to use the JD-800 Model Expansion .
If you see the "Expansion Memory Full!" message
There is not enough memory available for installation .
Follow the steps in "Uninstalling a Model Expansion" to free up the
memory .
If you see the "Incorrect License!" message
The JD-800 Model Expansion is currently linked to a different user
license .
Follow the steps in "Transferring User Data and Initializing Your User
License" (p . 5) to initialize the user license .

Uninstalling a Model Expansion

If there is not enough free memory, you can uninstall Model
Expansions that are already installed, and then install the
JD-800 Model Expansion .
1 .
On the EXPANSION top screen, use the PAGE [ä]
and [å] buttons to select the file to uninstall .
2 .
Press the PAGE [<] button to go to the
uninstallation screen .
A confirmation message appears .
If you decide to cancel, press the [EXIT] button .
3 .
Use the PAGE [>] button to select "OK," and press
the [ENTER] button .