High Performance Flashlight
High Performance Flashlight
I N S T R U C T I O N S
The TacLight with all-in-one features include a pre-attached wrist strap for easy
carrying, 5 modes, zoom function, rigid point for self defense, and water resistant.
WARNING! DO NOT SHINE DIRECTLY INTO EYES.
BATTERY INSTALLATION
1. Unfasten end cap and remove battery holder. See Diagram 1.
2. Insert 3 AAA batteries following the correct polarity (+, -)
marked on the battery holder.
3. When replacing battery case make sure the arrows on the sides
are facing toward the flashlight head.
4. Fasten end cap.
USAGE - 5 Modes
Fully depress the power button, located on the bottom of flashlight,
to turn the light ON (High mode). Keep fully depressing the power
button to alternate through the rest of the modes: Med, Low, Strobe,
SOS, OFF, and back to High.
ZOOM
Push base of lens forward to zoom in.
Pull back to zoom out. See Diagram 2.
DIAGRAM 2
LIFETIME REPLACEMENT WARRANTY
EMSON
warrants that, for the original purchaser's entire lifetime, Bell+Howell® Taclight won't have defects in
®
material and workmanship. If Taclight is found defective during this time, we will replace or repair Bell+Howell
Taclight at our option. To obtain the replacement or repair, send the product, your name, address, phone number, the
nature of the issue with your Bell+Howell
Taclight, and $9.95 for Processing & Handling (by check or money order)
®
to EMSON
®
, 230 5th Avenue, Suite 800, New York, NY 10001. You may direct questions to the EMSON
Customer Service Department toll free number 800-423-4248. When you ship your product to us, make
sure you can track your shipment and insurance, as we are not responsible for, and the Lifetime Warranty
does not apply to, items lost or damaged in transit. This warranty does not cover or apply to damage to
Bell+Howell
Taclight that is the result of misuse and abuse. In addition, the Lifetime Warranty expressly excludes
®
incidental and consequential damages of any kind whatsoever.
BELL+HOWELL® TACLIGHT ITEM NO.1176FEW/1176FEGW Distributed by EMSON®
New York, NY 10001, USA ©2016 EMSON® All Rights Reserved. Made in China.
DIAGRAM 1
®
®
Need help?
Do you have a question about the TACLIGHT 1176FEW and is the answer not in the manual?
Questions and answers
How do you change batteries in a bell and Howell mini lantern
To change the batteries in a Bell and Howell TACLIGHT 1176FEW:
1. Unfasten the end cap and remove the battery holder.
2. Insert 3 AAA batteries, ensuring the correct polarity (+, -) as marked on the battery holder.
3. When replacing the battery holder, make sure the arrows on the sides face toward the flashlight head.
4. Fasten the end cap securely.
This answer is automatically generated
How to take the head of flashlight off, to clean contact?