Adjust Volume; Reading The Display; Changing The Display - Bang & Olufsen BeoSound 1 Manual

Adjust volume

You can turn the volume up and down at any
time. If you store a volume level, the
BeoSound 1 starts at this level next time it is
switched on. The maximum volume level is 72,
but the maximum level that can be stored is 60.
VOLUME Press to turn the volume
down
Press to turn the volume up
32 The volume level is shown in
the display
STORE Press STORE twice to store the
volume level shown in the
display
VOLUME Press both and
ously to mute the speakers.
Press one of the buttons to
recall the sound

Reading the display

The luminous display will keep you informed
of the source you have chosen, and what the
system is doing.
Pr13 indicates the present radio
Pr13
program
88.9 indicates the radio
88.9
frequency
Cd 1 indicates that track num-
Cd 1
ber one on the CD is playing
Cd-- indicates that the CD is
Cd- -
paused
simultane-
2.33 indicates the time when
2.33
searching through a CD
32 indicates the volume
32
– – indicates that the speakers
– –
are muted
45 indicates the number of
45
minutes for a Stop Timer
20.15 indicates the time
20.15
AU indicates that a the AUX
AU
socket is activated
Pin indicates the PIN code
Pin
system
BeoSound 1 is in standby
•

Changing the display

Change the display mode or light, three
different light settings are available.
BeoSound 1 remembers ypur mode or light
setting until you change it again.
Change the display mode...
RADIO Press and at the same time to
change from program number
to frequency
RADIO To change back to program
number, pres
the same time
Change the display light...
STORE Keep the STORE button pressed
down
VOLUME Press to dim the display light
and press to brighten the
display light
9
and again at