Software Installation; Hardware Installation - LogiLink AU0002E User Manual

3.0 Installation

3.1 Software Installation

Follow the following steps is to install under Window 2000.
1. Turn on your computer; Make sure that the USB port is
enabled and working properly.
2. During the installation, please don't link USB-Serial cable with
your computer.
3. Double click "setup.exe "as following, then it will start
install
4. After installation, please click "OK "

3.2 Hardware Installation

1. Plug in the USB-Serial cable AU0002E into the USB port and
run the Found New Hardware Wizard to assist you in setting
up the new device.
2. Click 'Next' to continue.
- 3 -