Terumo CAPIOX EBS Circuit with X coating Instructions For Use Manual page 142

2. Tap or to input the communication port of the
destination PC/server you want to set. (Figure 3-101)
The input range is 0 to 65535.
3. Tap [OK] to complete the setting. (Figure 3-102)
Proceed to "Setting the DHCP".
 Setting the DHCP
1. Tap [DHCP] of [Controller]. (Figure 3-103)
The DHCP screen opens.
2. Select [On] or [Off]. (Figure 3-104)
The following screen examples show when [Off] is selected.
3. Tap [OK] to complete the setting. (Figure 3-105)
When the DHCP setting is set to [On], proceed to "Setting the On/Off status
of the LAN communication" (page 116).
When set to [Off], proceed to "Setting the IP address of the Controller".
Note
• If you do not tap [OK], the changes to the setting will not take effect.
Various menu settings
Figure 3-101
Figure 3-102
Figure 3-103
Figure 3-104
Figure 3-105
113