Changing The Polarit Y Reversal Time; Changing Calling Line Identification (Cli) Mode - Nokia 32 Features Manual

To change the loop interruption time, key in 2**Interruption_Time#.
The loop interruption time can also be changed with the Nokia 32 Configurator software
(menu: Nokia 32 -> Trunk mode)
Figure 6: Changing Loop interruption time

3.2 CHANGING THE POLARIT Y REVERSAL TIME

The polarity reversal feature is used to indicate call connection and possibly also call
disconnection.
To change the polarity reversal time, key in 3**Polarity_Reversal_Time#.
After you have keyed in the polarity reversal time the Nokia 32 terminal returns to the
configuration mode.
The polarity reversal time can also be changed with the Nokia 32 Configurator software
(menu: Nokia 32 -> Trunk mode). See figure 6.

3.3 CHANGING CALLING LINE IDENTIFICATION (CLI) MODE

The following CLI modes can be selected in the configuration mode:
000 =ETSI FSK (Default setting)
001 =DTMF
010 =DTMF-DK