Sealey AK9625EV Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT PlEasE REaD tHEsE iNstRuCtioNs CaREfully. NotE tHE safE oPERatioNal REQuiREMENts, waRNiNgs,
aND CautioNs. usE tHis PRoDuCt CoRRECtly aND witH CaRE, foR tHE PuRPosE foR wHiCH it is iNtENDED. failuRE to
Do so May CausE DaMagE aND/oR PERsoNal iNJuRy aND will iNValiDatE tHE waRRaNty.
1. safEty iNstRuCtioNs
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to

when using tools and equipment.
Do Not use if damaged.

Maintain calliper in good and clean condition for best performance.

Keep the work area clean, uncluttered and ensure there is adequate lighting.

Keep children and unauthorised persons away from the work area.

Do Not use the calliper for any purpose other than for which it is designed.

Do Not get calliper wet or use in damp or wet locations, or areas where there is condensation. Keep calliper clean and dry

using a dry cotton cloth only.
Do Not dip or submerge the calliper in any type of liquid.

Do Not expose calliper to bright sunlight or dust.

Do Not disassemble. The calliper must be checked by qualified service personnel only.

Do Not apply any voltage to the calliper i.e. with an electric marker pen.

The calliper is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks.

Use in reasonably constant temperature conditions of approximately 20°C.

Take particular care not to damage or scratch the scale surface.

When not in use, turn off and store calliper in a safe, dry, childproof location.

2. iNtRoDuCtioN & sPECifiCatioN
Hardened and tempered stainless steel dual powered digital calliper with satin finish. Solar powered but also with additional
battery cell (CR2016). When light is above 200LUX the solar panel will provide the power and below 200LUX the power will be
provided by the battery. Large LCD display for ease of reading. Metric and Imperial calibration with conversion between the two.
Zero setting control allows comparative measurement. Supplied in storage case.
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-150mm / 0-6"
Resolution. . . . . . . . . . . . . . . . . . . . . . . . 0.01mm / 0.0005"
Accuracy. . . . . . . . . . . . . . . . . . . . . . . . . 0.03mm / 0.001"
Cell Qty x Type . . . . . . . . . . . . . . . . . . . . 1 x CR2016
1 - Internal Measuring Faces
2 - Step Measuring Faces
3 - External Measuring Faces
4 - LCD
5 - Metric (mm)/Imperial (inch) Button
6 - On/Off Button
7 - Zero Button
8 - Lock Screw
INSTRUCTIONS FOR
Digital VERNiER CalliPER
solaR PowERED
aK9625EV
MODEL No:
9 - Solar Panel
10 - Battery Compartment
11 - Depth Gauge
AK9625EV Issue No: 15/07/09
fig.1