Summary of Contents for Harman Soundcraft NANO Series
Page 1
® USER GUIDE NANO SERIES MULTI-CHANNEL ANALOG MIXING CONSOLE WITH BLUETOOTH STREAMING ® M08BT / M12BT...
Page 2
Email: soundcraft@harman.com. Soundcraft is a trading division of Harman International Industries Ltd. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Soundcraft shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.
Page 3
® Safety Instructions For your own safety and to avoid invalidation of the point where they exit from the apparatus. warranty please read this section carefully. Only use attachments/accessories specified by the • manufacturer. IMPORTANT SYMBOLS Unplug this apparatus during lightning storms or when •...
Page 4
® Warranty Soundcraft is a trading division of Harman International Industries Ltd. End User means the person who first puts the equipment into regular operation. Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor.
® Introductions - M08BT / M12BT NANO Series multi-channel analog mixing console inherits legendary Soundcraft craftsmanship and is designed to meet various application requirements from studio recording and fixed installations. NANO Series owns two Bluetooth models in its product ® portfolio: M08BT (8 channels) and M12BT (12 channels), and represents a new level of design, quality and performance.
® Quick Start WARNING: Read and follow all the SAFETY INSTRUCTIONS when setting up and operating the unit. WARNING: Disconnect the power supply before setting up the unit. WARNING: Under no circumstances should the mains earth be disconnected from the mains lead. CAUTION: Turn all the input and output controls down before connecting the unit.
® Controls and Features The following features are applicable to both M08BT and M12BT. In case different features need to be described for each model, M08BT will be described first, followed by M12BT. 1. MIC INPUT (CH 1 to CH 5/6 of M08BT, CH 1 to CH 9/10 of M12BT) The MIC input is a balanced XLR-type input connector and accepts either BALANCED or UNBALANCED signals.
Page 10
® Controls and Features 9. COMP (CH 1- CH 2 of M08BT, CH 1 - CH 4 of M12BT) This compressor is designed as a leveling amplifier with moderate attack and release time, with make-up gain correlated to the COMP knob setting. Rotate the COMP knob to increase the compression amount, with respective make-up gain. BEST PRACTICES: The compressor has a fixed threshold of +4 dBu.
Page 11
® Controls and Features 16. PARAMETER (PRESS) Rotate the knob to select the desired effect from the 100 preset options, which include Echo, Vocal, Plate and versatile dual-effect combinations. (For detailed information, see “Effect Presets”. ) Push the knob to confirm the selection, then the LED screen (15) stops flashing and shows the selected preset permanently.
Page 12
® Controls and Features 23. +48V LED The +48V LED illuminates when the +48 V phantom power (34) is switched on. 24. PWR LED The PWR LED illuminates when the mixer is properly powered on. 25. OUTPUT LEVEL METER The 8-segment three-color LED meter constantly indicates the Main Mix output level. NOTE: When the MAIN/CTRL button (20) is engaged, this meter switches to indicate the USB return (from the USB interface (35)) level.
Page 13
® Controls and Features 32. AC INPUT Connect the mixer to the mains AC with the supplied AC cord. Please check the voltage available in your country and how the voltage for your mixer is configured before connecting your mixer to the mains AC. NOTE: Always replace the mains fuse only with the correct value fuse, as marked on the rear panel.
Page 14
® Controls and Features • When the player is in play state, a press of the button for 2 seconds switches the player to soundtracks in the previous media file stored in the USB memory; a press of the button for longer than 2 seconds toggles among media files stored in the USB memory.
® Effect Presets PRESET DESCRIPTION PARAMETER Reproduce the sound in input on the output after a lapse 00~09 Echo Delay time: 145~205ms of time or delay. Delay time: 208~650ms 10~19 Echo+Verb Echo with room effect. Decay time: 1.7~2.1s 20~29 Tremolo Amplitude modulation of the signal.
® Specifications M08BT M12BT Gain Mic input gain 0 to 50 dB, ±5% Line input gain -20 to 30 dB, ±5% Noise Mono channel Mic input E.I.N. (max gain, non-weighted) < -126 dBu (150Ω source) Stereo channel Mic input E.I.N. (max gain, non-weighted) <...
® Audio Connectors 2=Hot(+) 1=Ground/Screen To Processor Input 3=Cold(-) Use for Balanced Mic Inputs (For unbalanced use, connect pin 1 to 3) 3-pin XLR Male Plug Sleeve=Ground/Screen Tip=Send Signal (seen from soldering side) To Channel Insert Ring=Return Signal Sleeve Ring 2=Hot(+) 1=Ground/Screen 3=Cold(-)
Page 20
NANO SERIES - M08BT / M12BT USER GUIDE 12/2018...
Need help?
Do you have a question about the Soundcraft NANO Series and is the answer not in the manual?
Questions and answers