Advertisement
5. OPERATION
5.1.
INSTRUCTIONS FOR MODELS: GWC1200M, GWE1200M AND GWW1200M.
WARNING! Before using the winch ensure you read, understand and apply Section 1 safety instructions.
‰
NOTE! Re-lubricate all shafts and gears before use.
5.1.1.
Fit handle and secure with lock nut and supplied washer.
5.1.2.
To lift, push direction selector into position shown in fig.5 and turn handle clockwise.
5.1.3.
To lower, move the direction selector to the position shown in fig.6 and turn the handle anticlockwise.
5.1.4.
To activate the free spool function, move the direction selector to the middle position, see fig.7.
5.2.
INSTRUCTIONS FOR MODELS: GWC2000M, GWE2000M AND GWW2000M.
5.2.1.
Fit handle to desired ratio shaft and secure with washer and lock nut (fig.8).
5.2.2.
Refer to fig.8 for lower and lift directions.
5.2.3.
Free wheel is selected by putting the direction selector in the middle position.
WARNING! Beware of injury caused by the spinning handle in free spool mode.
‰
WARNING! Never fully extend the cable or strap when under load.
‰
WARNING! Load capacity is reduced as layers build up on the drum.
‰
fig.5
6. MAINTENANCE
6.1.
Keep winch, cable and strap clean. Inspect cable and strap regularly checking for fraying, kinks, broken strands or distortion and
replace if necessary. Keep the cable and unit lightly oiled for protection. Although the winch has been fully lubricated during
manufacture, periodically grease gears, reel shaft and handle threads, but DO NOT get oil or grease on the brake mechanism.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Important: No Liability is accepted for incorrect use of this product. Please note that other versions of this product may be available. If you
require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.7
01284 703534
Original Language Version
GWC1200M, GWE1200M, GWW1200M, GWC2000M, GWE2000M, GWW2000M Issue:3 (H,F) 23/04/19
fig.6
sales@sealey.co.uk
fig.8
www.sealey.co.uk
Advertisement
