Advertisement
2. iNtrODuctiON
Powerful electric mixer built into heavy-duty composite casing with a mixing volume of up to 80ltr (120ltr Pm120l). Two speed
settings and soft start allow for greater control when mixing a variety of materials. Supplied with two mixing paddles capable of
mixing paint, varnish, tile adhesive, cement, plaster, mortar as well as a number of other liquid and dense materials. lightweight
design and over 2mtr of cable make this mixer easy to use.
3. SPecificatiON
model no .............................Pm80l...................Pm120l
motor power ........................1220W.....................1400W
Supply ...................................230V.........................230V
no load Speed...............0-800rpm.................0-800rpm
mixing Capacity ...................... 80ltr........................120ltr
Paddle Size ..................... Ø120mm................ Ø140mm.
Thread .................................... m14..........................m14
Weight ...................................4.7kg........................7.5kg
4. OPeratiON
4.1.
ensure that the tool is switched off and the power
supply removed.
4.2.
Screw mixing paddle e1 on to shaft e2, tighten
with spanners G.
4.3.
Screw mixing paddle assembly into mixer d.
4.4.
Connect plug to power supply and switch on.
4.5.
ensure the mixing container is securely positioned
on the floor.
4.6.
dip the mixing paddle into the substance to be
mixed.
4.7.
Set wheel C (Speed control) to low speed. Always
hold the mixer with two hands.
4.8.
Switch on the tool.
4.9.
Gradually increase the mixing speed by turning
wheel C to the desired maximum speed (so that the
substance will not splash around and the tool will
not be overloaded).
4.10.
When mixing is complete switch off mixer before
removing from substance.
4.11.
Remove power supply and clean off paddle.
5. maiNteNaNce
5.1.
disconnect the plug before cleaning
5.2.
Always keep tool and cord clean (especially the ventilation slots).
5.3.
Always clean the mixer and functional parts after your mixing work.
5.4.
Clean the tool with a dry, soft cloth (do not use cleaning agents or solvents).
5.5.
Clean ventilation slots F regularly with a brush or compressed air.
N.B. When not in use switch mixer off, remove plug from power supply, clean the mixer and store in safe, dry, child proof area.
eNvirONmeNt PrOtectiON
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee reGulatiONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson way, Suffolk Business Park, Bury St edmunds, Suffolk. iP32 7ar
01284 757500
© Jack Sealey limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PM80L, PM120L Issue:2(SP) - 31/07/18
Advertisement
