Enable Client Web Access - Axis Camera Station User Manual

Enable Client Web Access

AXIS Camera Station User's Manual
If you want to allow clients to access the AXIS Camera Station Web, proceed
with these steps:
To be able to log into AXIS Camera Station from a web browser, the user must
be created in the Windows user database. See Granting a Domain User Camera
Access, on page 51.
1. From the Administration pages, select the General tab.
2. In the Server IP address field, make sure the correct IP address that clients
will use to connect to the server is entered. Make a note of the IP address.
3. Select Enable Webserver | Yes.
4. Enter the IP address or name of the proxy server, and port if applicable, e.g.
http://193.168.0.1:3128. Note that you cannot use an address to a script.
5. Enter the user and password as defined for your proxy server and then OK.
The installation of the web interface will start.
If you don't have Internet Information Server (IIS) 5.0 or later installed, you will be prompted
to do so, keep your Windows CD handy. When IIS has been successfully installed, the AXIS
Camera Station Web Installation Wizard will be launched, click your way through it. If running
Windows XP, you will need to permit the firewall to accept incoming requests from clients
when prompted.
AXIS Camera Station Web
65