Change C Register, Phase Detector Select - Motorola MC145220EVK Manual

Change C Register, Phase Detector Select

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
This is the resulting screen that is displayed after the user selects the '[N] Change C Register and Pres-
cale' and then the '[3] Change phase detector select' command. The user is provided a submenu to se-
lect from. This submenu contains commands to toggle the phase detector setting.
The current phase detector setting is displayed as 'phi R & phi V' or 'PD out ', depending on the setting.
The user can select the [0] and [1] menu options to toggle the phase detector select setting.
If the [Q] command is selected, then the user is returned to the main menu.
Available Boards – Current target board is: A, MC145220 Dual
Brd [A]!: MC145220 Dual
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaluation program modifies Phase Detector Select on both PLL's for this board.
Change C Register, Phase Detector Select – Currently: PDout
[0]! phi R & phi V, phi R & phi V
[1]! PDout, PDout
[Q] to return to previous menu
This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the "Define boards to program" screen, press [Q]! . This will
place you in the "Select from the available options" screen. In this screen, press [N]. This will place you
in the "Change C Register and Prescale" screen. To access the screen above, press [3].
This sequence to access the "Change C Register, Phase Detector Select" screen works the same for any
selected board in the "Define boards to program" screen.
MC145220EVK
28
Freescale Semiconductor, Inc.
Welcome to MC145xxx EVK Demonstration Program, rev 4.0
Change C Register, Phase Detector Select
Brd [–]!: N/A
[X]! Terminate demonstration program. [?]! View help screen.
For More Information On This Product,
Go to: www.freescale.com
Brd [–]!: N/A
MOTOROLA