Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Barton Moretti
Summary of Contents for Barton Moretti
- Page 1 User Manual...
- Page 3 OWNERS MANUAL FOR BARTON HYPER MOPED...
- Page 5 INTRODUCTION We are pleased to welcome you among the buyers of Barton Motors' two-wheeled vehicles. Thank you for purchasing our vehicle and at the same time we are convinced that you have made the right choice. Have a nice ride! This manual contains advices on maintenance and handling as well as advice necessary for safe driving.
-
Page 6: Table Of Contents
TABLE OF CONTENTS Road Safety Vehicle construction ………………………………………….………………………………………………...…………..…….2 Operation and function of vehicle components 1. Ignition 2. Switch assembly on the left side of the steering wheel 3. Switch assembly on the right side of the steering wheel 4. Meter 5. -
Page 7: Road Safety
ROAD SAFETY ● Obey all traffic signs and regulations.. ● Adjust your speed to the road conditions. ● Check the technical condition of your vehicle regularly. ● Wear weather-appropriate moped clothing that gives you good visibility on the road ● Learning to drive should take place in facilities that allow you to obtain a Driving Licence;... -
Page 8: Vehicle Construction
VEHICLE CONSTRUCTION Rys. 1... - Page 9 VEHICLE CONSTRUCTION Rysunek 1. 1. Rear indicators 2. Silencer 3. Fuel tank with filling unit 4. Front brake lever 5. Headlamp 6. Meter 7. Rear brake lever 8. Front indicators 9. Front shock absorber 10. Foot lever for rear brake...
-
Page 10: Operation And Function Of Vehicle Components
OPERATION AND FUNCTION OF VEHICLE COMPONENTS 1. Ignition Turning the key turns the ignition on and off. Warning: do not use the key while driving! Advice: when the engine is not running, turn the key to the OFF position - this prevents depletion or damage to the battery. -
Page 11: Switch Assembly On The Left Side Of The Steering Wheel
● Turn the key from LOCK to OFF position 2. Switch assembly on the left side of the steering wheel Direction indicator switch The switch is used to turn on the directional lights when turning left or right. ● To turn on the left turn signal, push the switch to the left ●... -
Page 12: Switch Assembly On The Right Side Of The Steering Wheel
3. Switch assembly on the right side of the steering wheel Electric starter button To start the engine, press the brake lever and press the starter button - the engine will start. Advice: be careful not to run the starter for too long - this can damage the battery 4. -
Page 13: Brakes
5. Brakes Right lever – front brake Left lever – rear brake The pull path of the brake is 10-20 mm. The vehicle usually has a front brake and a rear drum brake. Adjustment can be made by turning the brake cable adjustment screw clockwise. -
Page 14: Brake Fluids
● abrasion of the brake pads or the distance between the normal position of the front brake and the handlebar grip is 10-20 mm 6. Brake fluid The vehicle was filled with special brake fluid from the factory. The scooter user should fill or replace the fluid with the recommended fluid (DOT4). -
Page 15: Fuse
It's connected to the battery. When the light and entire circuit fails, check the fuse first. The fuse can only be replaced by a new fuse. 9. Battery Battery for Barton Hyper: 12V 7Ah Caution: ● when the voltage is less than 11. 5 V, use the foot starter ●... -
Page 16: Fuel Tank
● To ensure optimal battery performance over a long period of time, it is advisable to remove the battery and recharge it regularly when it is not in use for more than 14 days 10. Fuel tank and fuel When the fuel level indicator shows a red area, fill the tank with the recommended Pb95 fuel. - Page 17 Air filter replacement ● the air filter shall be situated on the left side of the vehicle ● loosen the screws and remove the cover ● remove the air filter cartridge ● clean the cartridge with a cleaning agent or, if this is not possible, replace the filter with a new one ●...
- Page 18 Refer to the periodic inspection table for information on cleaning and replacement intervals...
-
Page 19: Pre-Trip Inspection
PRE-TRIP INSPECTION Always inspect your vehicle for any defects or problems before driving. In the event of any irregularities, the vehicle should be taken to a Barton Motors Authorized Service Center for inspection and repair. Check: ● Steering wheel: check that it functions smoothly and that all parts are present ●... - Page 20 Starting the engine Make sure there is enough fuel and oil in the vehicle before starting the engine. Starting the engine with an electric starter ● Turn the key to position and check that the low beam and turn signals are working.
- Page 21 Starting to drive ● After starting the engine while it is still idling (loose), do not rapidly add gas to avoid overloading the engine. ● When going up a larger hill or with a load on the vehicle, the engine needs more power, so shift to a lower gear before the bike loses power.
- Page 22 When you want to overtake another vehicle you can shift to a higher gear and accelerate. The table shows the range of speeds you can achieve in each gear. Prędkość, przy której powinno zmieniać się biegi 1st gear 2nd gear 3rd gear 4th gear 5th gear...
- Page 23 Braking ● Turn the accelerator handle to its initial position and depress the front and rear brake levers ● You brake correctly when you apply the brake levers progressively ● For the most effective braking, use both brakes simultaneously. ● Use pulse braking when descending a hill.
-
Page 24: Running-In
RUNNING-IN Proper use of the vehicle extends its life. During the first 1000 km, the speed should be kept below 50 km/h. Adjust the speed according to the table below. Mileage in km 0 – 300 300 - 500 500 - 700 700 - 1000 Speed in km/h 40-50... -
Page 25: Periodic Inspection
PERIODIC INSPECTION Maintenance The maintenance schedule indicates how often the vehicle should be serviced and which components require special attention. For safe, reliable and trouble-free operation, it is very important that the vehicle is maintained on schedule. Maintenance schedule The following schedule contains the maintenance points required to keep the vehicle running in good condition under normal conditions. -
Page 26: Periodic Checks Schedule
PERIODIC CHECKS SCHEDULE FOR MOTORCYCLE 125 CCM Distance (in kilometers) Name 1500 3000 4500 6000 8000 10000 Engine oil Gear oil Fuel lines Valve clearance Engine idle speed Drive chain Check chain tension regularly and adjust if necessary Front and rear suspension Steering mounting screws Spark Air filter... -
Page 27: Methods Of Environmental Protection And Fuel Economy
METHODS OF ENVIRONMENTAL PROTECTION AND FUEL ECONOMY In order to maintain the proper functioning of your vehicle, to reduce the release of harmful substances into the environment and to achieve the most economical driving possible, it is important that your vehicle is properly maintained.. Clean or replace the air filter The air filter is used to filter out debris entering the cylinder. - Page 28 Reasons for improper carburetor operation can be: ● The fuel level in the carburetor is too high. It should be adjusted accordingly. ● The vents are positioned incorrectly. They need to be adjusted. ● The carburetor is very old. It needs to be replaced. Clean, adjust and replace spark plugs Remove dirt from the spark plug and adjust the clearance.
- Page 29 When changing the engine oil, the level must not exceed the upper value: if the oil level is too high, the oil pressure increases, which can cause engine leakage and increased oil consumption. Perform engine repairs and vehicle inspections An old and worn out engine causes fuel waste and high engine oil consumption. Engine overhaul must not be delayed.
-
Page 30: Technical Vehicle Data
TECHNICAL VEHICLE DATA Name Data Name Data Measurements(mm) 2070 x 900 x 1100 Wheelbase (mm) 1360 Weight (kg) Engine model LX157FMI Engine single-cylinder, 4T Engine capacity 125 ccm Speed max. (km/h) SAE 15W40 Permissible payload(kg) Spark D8EA Brakes (front/rear) disc/disc Starter electric,foot Fuel tank (litres)
Need help?
Do you have a question about the Moretti and is the answer not in the manual?
Questions and answers