Table of Contents
Advertisement
Available languages
Available languages
There are a number of common issues that can affect the signal reception quality or
the operation of the unit. The following sections address these issues and potential
solutions
A. No function when power on the controller
i.
Check again all the cable connections have been made correctly.
-
Connection between the power and controller.
-
Connection between the controller and antenna. Make sure that the left port of the antenna should be
connected to the controller.
ii.
Check if the power input cable has been damaged.
iii.
Check the battery polarities (+/-).
B. Fail to search the selected satellite
i.
Satellite signals can be blocked or degraded by buildings, trees.
Make sure there are no obstructions in a southward direction.
ii.
Select another satellite as example Astra3, if this locks then select your desired satellite.
iii.
Turn the unit off and then back on again and select desired satellite.
C. Mechanical problems
i.
If the antenna does not move into desired position.
-
Try to power OFF/ON again.
ii.
If the antenna makes a noise whilst remaining static.
-
Try to power OFF/ON again. If problem persists, please contact local dealer/shop for assistance.
D. Other issues
i.
If the system has been improperly wired, it will not operate properly. Contact local
dealer/shop for assistance of cable damage.
6. Troubleshooting
ENGLISH - 11
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SNIPE 3 and is the answer not in the manual?
Questions and answers
Ho notato che la parabola gira anche a mano è normale se si non si muove durante la marcia?
No, the SELFSAT SNIPE 3 satellite dish is designed to align automatically with a preset satellite as long as it has a clear view of the sky. Before traveling, the antenna must be manually sent to the HOME position using the HOME button. If the dish does not move during travel, manual rotation is not necessary unless repositioning is required for better signal reception.
This answer is automatically generated