Registration Of A Control Panel To The Inim Cloud User Account - INIM Electronics Previdia Compact User Manual

User's manual
Buttons for quick viewing
These are always present and
[C]
show, superimposed, the number
of events present in the Installation
Register that are unsigned.
[D]
[E]
[F]
4.2

Registration of a control panel to the Inim Cloud user account

After creating an Inim Cloud service account, the user can request the registration of a new control panel to those they
have access to via the web interface.
The control that the user wants to register to their account must first be registered to the Cloud service by an installer.
1. Access the Inim Cloud service as a user.
2. Clicking on the button that manages your profile accesses a page where you can set the
parameters of the account and the registered control panels.
In the lower section, below the list of control panels, you have the "New INIM system" section.
3. The Add button will allow you start the registration process. The Cloud service will send an OTP (One Time
Password) number consisting of 6 digits to the user. This number has a limited time duration of 15 minutes.
4. Enter your user code at the control panel you want to register.
Note:
In order to be able to register control panels to your Inim Cloud user account, you must have a user
code (level 2) of a "superuser" type or higher.
5. Access the "System Status" section, then "Cloud", then the "Enroll" option.
6. Enter the OTP password and wait for the registration result.
The result of the procedure will be shown with one of the following messages:
• "Account created!": the control panel has been successfully registered to the Cloud
• "Communicat.Error": generic communication error.
The possible causes may be:
- no Internet connection
- date of manufacture of the control panel is before dd/mm/yyyy
- date/time of control panel different, ahead of or behind the exact date/time by more than 15 minutes
• "Already enrolled": the control panel is already registered to Cloud
• "Bad/expired OTP": the entered password is incorrect or expired
• "Panel notEnabled": the control panel cannot be registered to Cloud.
Inim Cloud Fire
Button that opens a window listing the last 4 alarm or tamper events.
Button that opens a window listing the last 4 fault events.
Button that opens a window listing the last 4 control panel events as
Button that opens a window listing the last 4 Cloud events.
Buttons for user profile management
Section for viewing all the signalling in progress
Text section relating to the button pressed
Alarms
Faults
Other events
well as any alarms or tamper events.
Cloud events
15