GE LOGIQ E9 Service Manual page 556

GE
D 5535208-100, R
IRECTION
Table 8-126 BEP removal - R4.x and later
3.
NOTE: All the connectors to the CB
(ChargeBoard) must be "unlocked" to
remove.
Disconnect:
• the battery cable from PCN1 on the CB
(ChargeBoard).
• the CB to the PB (PowerBoard) cable
from PCN2.
Place the BEP cover aside.
4.
Remove the two 5 mm HEX key screws at
the inside base of the BEP.
8 - 210
. 2
EV
Steps
Section 8-9 - BEP (Back End Processor) parts replacement
LOGIQ E9 S
Corresponding Graphic
BEP6 CB cables
BEP Base HEX key screws
M
ERVICE ANUAL