1. Manuals
  2. Brands
  3. Syntron Material Handling Manuals
  4. Industrial Equipment
  5. V-75-A
  6. Service instructions manual

Syntron Material Handling V-75-A Service Instructions Manual

Electromagnetic vibratorsv
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Service
Instructions
Syntron
®
Electromagnetic
Vibrators
Model: V-75-A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V-75-A and is the answer not in the manual?

Questions and answers

Related Manuals for Syntron Material Handling V-75-A

Summary of Contents for Syntron Material Handling V-75-A

  • Page 1 Service Instructions Syntron ® Electromagnetic Vibrators Model: V-75-A...

  • Page 2: Installation

    INTRODUCTION The Model V-75-A is a solid impacting electro-magnetic vibrator designed to promote the free flow of bulk materials through a straight-line vibratory action. This action is transmitted to the installation through the vibrator base.

  • Page 3: Maintenance

    CAUTION: Excessive current draw is caused by too wide an air gap or too much spring tension, resulting in heat build-up and blown fuses. Low current is caused by too narrow an air gap, resulting in striking of the core and armature assemblies. Do not operate the vibrator while these conditions exist. Refer to ”Vibrator Adjustment”...

  • Page 4: Maximum Current Ratings

    Loose Connections Repair Not Run in Controller Defective Rheostat Replace Replace only with parts recommended, or supplied by SMH. PARTS LIST – ELECTROMAGNETIC VIBRATOR MODEL: V-75-A ITEM DESCRIPTION PART NO. Armature Casting C-57566-A Cap Screw, Hex Hd. (3/8”-16 x 2”) H0310901 Lockwasher 3/8”...
  • Page 5 Parts List cont. ITEM DESCRIPTION PART NO. Coil & Cable Assembly (230V-50Hz) B-84834-B Coil & Cable Assembly (115V-25Hz) B-84836-A Coil & Cable Assembly (230V-25Hz) B-84903-B Coil & Cable Assembly (460V-25Hz) B-84836-C Coil Washer A-13156 Lockwasher (#10) H0112458 Mach. Screw, Rd. Hd., Br. (#10-32 x 3/8”) H0203102 Rubber Transverse Spring Spacer A-15688...
  • Page 6 Mounting Electromagnetic Bin Vibrators The correct location of electromagnetic vibrators is of prime importance in obtaining maximum efficiency from the selected model. CURVED SURFACES Figure 1 Select a bracket made from a channel section or a bent plate when mounting a vibrator to a curved surface. A center gusset is required for all totally enclosed vibrators, and two blocks of sufficent height to contact the curved surface are required for models V-75 and V-500.
  • Page 7 Corporate Office P.O. Box 1370 Tupelo, Mississippi 38802 Phone: 662.869.5711 Fax: 662.869.7449 Changshu Tupelo #2 Road No. 1 2730 Hwy 145 South Changshu Export Processing Zone Saltillo, Mississippi 38866 Changshu, Jiangsu, China 215513 Phone: 662.869.5711 Phone: +86 0512.52299002 Fax: 662.869.7493 Fax: +86 0512.52297228 Toll Free: 800.356.4898...

Table of Contents