Controller - Intimidator eNVy neighborhood vehicle Owner's Manual

Controller

Notice:
• The controller is water resistant, not waterproof.
• Avoid spraying the controller with high-pressure water.
• Do not submerge the controller.
• Do not attempt open, repair, or otherwise modify the controller.
• Contact your authorized eNVy dealer if error codes display.
The controller, or computer, is the brain of the vehicle. The
vehicle's rate of acceleration and deceleration can be adjusted by
the owner. If a fault occurs, the controller will display error codes on
the digital display.
Controller LED Status
The two LEDs located on the controller have four different display
modes, indicating the type of information they are providing.
Controller LED Status Chart
Display
Neither LED illuminated
Yellow LED flashing
Yellow and red LEDs both
on solid
Red LED on solid
Red LED and yellow LED
flashing alternately
Status
Controller is not powered
on; or vehicle has dead
battery; or severe damage.
Controller is operating
normally.
Controller is in Flash
program mode.
Watchdog failure or no
software loaded.
Controller has detected a
fault.
35
Action
If machine will not turn
on, or turns on with this
indicator, contact an
authorized dealer.
None
None (occurs during
software updates)
Contact dealer
See "Controller
Troubleshooting";
contact dealer.