Frequency Lighting Effect Effect Direction Change of Color Change Lighting Effect 1 left, right, up, down Automatically Lighting Effect 2 Automatically Lighting Effect 3 left, right Automatically Lighting Effect 4 Fn + Scroll Lock Lighting Effect 5 Automatically ...
Page 6
The settings of an individual color from the RGB spectrum only works with the “Permanent” lighting effect. Therefore, first select “Permanent” lighting effect. Press and hold the Fn key and then press twice the End key. The “Permanent” lighting effect has seven preset colors (red, green, yellow, blue, turquoise, pink and white), which can be access and cycled through by repeatedly pressing the Fn + End key combination.
Page 7
To set up lighting profiles, press and hold the Fn key, and then press ESC. The lighting profile keys F1 to F4 will start blinking. Now select a profile by pressing the corresponding F-key; then press all the keys that should be permanently illuminated. Press a key several times to change its illumination color.
All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product specifications may vary.
Need help?
Do you have a question about the PureWriter RGB and is the answer not in the manual?
Questions and answers