Add Your Thermostat To The Neviweb App; Disconnect Your Thermostat From The Wi-Fi Router Or The Neviweb App; User Settings - Sinope TH1123WF Installation Manual

ADD YOUR THERMOSTAT TO THE NEVIWEB APP

1
If you do not have an account yet,
download the Neviweb app for iOS or
Android to open an account and add
your device.
3
Follow the steps of the
Installation Wizard

USER SETTINGS

10 sec.
2 Tap the
1
2
3
All of the thermostat's settings can be set through the Neviweb app.
However, if you have not created your account and wish to change
the temperature format or the control cycle, you need to:
Get the setpoint to its minimum and hold the
10 seconds to access the menu.
Press the
Out
Press the
next parameter. Continue to press until the end of the list to exit
the menu.
The following table lists the settings that can be changed directly
on the thermostat.
You can change more settings through the Neviweb app.
Settings which can be modified on the device directly:
Name
Temp
Cycle
then select "Add Device"
button for
or button to change the setting.
and buttons simultaneously to save and go to the
Parameters & settings
Temperature format
°C or °F (default: °C)
Control cycle
SHT (short cycle for electric baseboard)
FAN (long cycle for fan forced heater)r)
DISCONNECT YOUR THERMOSTAT FROM THE
WI-FI ROUTER OR THE NEVIWEB APP
To disconnect your thermostat from the Wi-Fi router press the
and buttons simultaneously for 10 seconds. The
symbol will disappear from the display.
To remove your thermostat from Neviweb, press Delete in
the thermostat settings.
Use of the Works with Apple badge means that an accessory has been designed to work
specifically with the technology identified in the badge and has been certified by the developer
to meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
HomeKit is a trademark of Apple Inc.
Neviweb® is a registered trademark of Sinopé Technologies Inc. in Canada and the United States.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play
and the Google Play logo are trademarks of Google Inc.
The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®
Transmitter Module IC : 21098-ESPWROOM32 / FCC ID: 2AC7Z-ESPWROOM32
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device does not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
OFF and ON, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3-year limited warranty
Display SINOPÉ TECHNOLOGIES INC. warrants the components of their products against
defects in material and workmanship for a 3 year period from the date of purchase,
under normal use and service, when proof of purchase of such is provided to the
manufacturer. This warranty does not cover any transportation costs that may be
incurred by the consumer. Nor does it cover a product that has been improperly
installed, misused or accidentally damaged. The obligation of Sinopé Technologies
Inc., under the terms of this warranty, will be to supply a new unit and this releases
the manufacturer from paying the installation costs or other secondary charges
linked to replacing the unit or the components.
660-1505-0005-B
Out
10 sec.
For more information, visit our Website: