Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for saphe Saphe Drive
Summary of Contents for saphe Saphe Drive
- Page 1 Last updated 14.02.2019 www.saphe.dk...
- Page 2 Scandinavia since the product was launched on the market. The sheer number of Saphe units sold means that we are able to offer the largest network of users, and the best platform for sharing traffic data on the market.
-
Page 3: Table Of Contents
Warning Package contents Product description Before use Charging Download the app On/off Temperature effect Pairing your phone and Saphe Drive Pairing with several phones Before driving GPS/Location Check GPS Get to know Saphe Drive Types of alarms Display Confirm alarm... -
Page 4: Identification
Identification Product name: Saphe Drive Model No.: 0002-00-001-001 Manufacturer: Saphe A/S Lyngvej 1 9000 Aalborg, Denmark CVR Number: 36704586 www.saphe.dk info@saphe.dk Technical specifications Specifications Dimensions: 65 x 38 x 10 mm Weight: 32 g Screen: 1,54” Temperature range (use): - 50... -
Page 5: Package Contents
Package contents The package contains six different parts: 1. Saphe Drive 5. 80 degree base 3. Magnetic holder 2. Micro USB 4. 60 degree base Product description Alarm type. Current speed. Left button. (set-up speed camera) Centre button. (select/confirm) Distance to alarm. -
Page 6: Before Use
On/Off For everyday use, there is no need to switch the Saphe Drive device on and off. Saphe Drive has a highly optimised power consumption and automatically goes into rest mode when you are not out driving. To switch the Saphe Drive device on and off, press the centre button until the power off icon appears. -
Page 7: Temperature Effect
Pairing your phone and Saphe Drive Before you can start using Saphe Drive in your vehicle, you must make sure to pair Saphe Drive with your phone. This must be done via the “Saphe Link 2” app and not via the Bluetooth menu on your phone. -
Page 8: Gps/Location
GPS/Location services On an iPhone, it is important that the Location service for Saphe Link 2 is set to “Always”. This means that the app is always allowed to turn on the GPS, but it only does so while you are driving. If you choose “While using”, then Saphe Link 2 will only work if you turn on the app and keep the screen... -
Page 9: Get To Know Saphe Drive
Get to know Saphe Drive Types of alarms Saphe Drive has three general categories of alarm types, which are identified on the app using three colours: Red for Warnings, Blue for Cameras, and Yellow for Traffic Information. There are different types of alarms under each category and they all have their own unique icons. -
Page 10: Display
Display Saphe Drive has two main screens: the Home Screen and the Alarm Screen. The Home Screen is only displayed if there are no incidents nearby, and it works as an extra speedometer. If there is an alarm nearby, which has already been set up by other users or received from a third party, then the Alarm Screen will be displayed. -
Page 11: Set Up Alarm
The GPS coordinates for the alarm are calculated from the time you press the side buttons. Press the side buttons for a few seconds to enter the Navigate by using the side buttons and confirm the alarm Set-up menu. type by pressing the centre button. Last updated 14.02.2019 www.saphe.dk... -
Page 12: Alarms When Abroad
Installation of Saphe Drive Saphe Drive comes with a holder in two different angles. The device should be installed so it is always within your range of vision and your reach. The holder can either be mounted on the windscreen or on the instrument panel. -
Page 13: Maintenance
When a new firmware update is available, Saphe Link 2 will notify you of this: Enter the app to start the updating process. Note: Saphe Drive must have enough power to be able to run the update. The app will notify you if there isn’t enough power to complete the update.
Need help?
Do you have a question about the Saphe Drive and is the answer not in the manual?
Questions and answers