Steelcase Answer Low Cost Worksurfaces Manual

Download this manual

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

2001 Steelcase Inc.

Grand Rapids, MI 49501

U.S.A.

Printed in U.S.A.

page 6

page 7

Answer

Low Cost Worksurfaces

Page 1 of 7

939504742 Rev B

Need help?

Do you have a question about the Answer Low Cost Worksurfaces and is the answer not in the manual?

Page 1 6 page 7 If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
Page 2 Cantilever and Tie Strap See Cantilever Assembly Direction 939504645 Center Support Panel See End Panel Assembly Direction 939504646 End Panel See End Panel Assembly Direction 939504646 Pedestal Filler See Pedastal Filler Assembly Direction 939504604 Attaching Brackets page 4 Mounting Brackets page 3 Page 2 of 7 939504742 Rev B...
Page 3 Mounting Worksurfaces Step 1: Mark height of worksurfaces to 27 1/2". Attach the support brackets to the vertical junctions. A minimum of 1 pilot hole per corner and side support bracket is provided. All other supports contain a minimum of 2 pilot holes. 27 1/2"...
Page 4 Attaching Adjoining Worksurfaces Place support plates as shown. Secure a screw in all available holes. Primary Wing Page 4 of 7 939504742 Rev B...
Page 5 Corner Leg Combination " Gap Pilot Holes Provided Pilot Holes Provided Connecting Worksurfaces with Legs. Pilot Holes Provided Page 5 of 7 939504742 Rev B...
Page 6 See page 2 for support information Page 6 of 7 939504742 Rev B...
Page 7 See page 2 for support information Page 7 of 7 939504742 Rev B...