Download
Share
Print this page
Princess auto mr.blacksmith Owner's Manual
  1. Manuals
  2. Brands
  3. Princess auto Manuals
  4. Tools
  5. mr.blacksmith
  6. Owner's manual

Princess auto mr.blacksmith Owner's Manual

Electronic parking brake tool
Hide thumbs

Advertisement

Quick Links

Download this manual
Electronic Parking Brake Tool
Owner's Manual
]
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
8943391

Advertisement

loading
Need help?

Need help?

Do you have a question about the mr.blacksmith and is the answer not in the manual?

Questions and answers

Related Manuals for Princess auto mr.blacksmith

Summary of Contents for Princess auto mr.blacksmith

  • Page 1 Electronic Parking Brake Tool Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. 8943391...

  • Page 2: Product Features

    Safety Precautions And Warnings To prevent personal injury or damage to vehicles and/or the Scan Tool, read this instruction  manual first and observe the following safety precautions at a minimum whenever working on a vehicle: Always perform automotive testing in a safe environment. ...
  • Page 3 13. The Electronic Parking Brake program works with: 14. Audi A6/A8 (2004-on), 15. VW Passat (2005-on), 16. Mercedes E211/E219 (up to 2006), and S221 (up to 2007). 17. Volvo S80 (2007-on), V70 (2008-on), XC70 (2008-on), XC60 (2010-on), S60 (2011-on). Vehicle Application Coverage Audi/VW Open/close brake calipers to replace brake pads safely and efficiently.

  • Page 4: Tool Description

    Tool Description 1. LCD DISPLAY Indicates test results. It is a backlit 2-line display with 8 characters on each line. 2. ENTER BUTTON Confirms a selection (or action) from a menu list, or returns to the main menu. 3. EXIT BUTTON Scrolls through menu items or cancel an operation 4.
  • Page 5 press ENTER button to confirm. Diagnose EPB On Volkswagen Cont. >1) Read Codes 2) Erase Codes 3) Deactivate Brake 4) Activate Brake 3. View DTCs and their definitions on screen. 4. If more than one DTC is found, use UP/DOWN button, as necessary. If no codes are detected, a “No codes are stored in the module!”...
  • Page 6 they are deactivated successfully, a Deactivation done message comes up. Press any key to continue. If the tool fails to open the brake pads, a Deactivation Failed! Please try again message comes up. Verify that the ignition is ON; Key On Engine Off Check if the brake tool’s OBD II connector is securely connected to the vehicle’s DLC;...
  • Page 7 4. Use UP/DOWN button to select For Pad Change from Guided Function menu and press ENTER button to confirm. >1) For Pad Change 2) For Repairs Press ENTER button to continue and EXIT to exit. Guided Test Condition 1) Turn ignition on 2) Release Emergency Parking Brake (EPB) Diagnose EPB On Audi Cont.
  • Page 8 Diagnose EPB On Audi Reading Codes Individual Function 1. Use UP/DOWN button to select Individual Function from Select Menu and press ENTER button to confirm. 1) Guided Function >2) Individual Function 2. Use UP/DOWN button to select Read Codes from Select Function menu and press ENTER button to confirm.
  • Page 9 For Pad Change is used to open the brake calipers completely for changing of worn pads. For Repairs is used for repairs other that pad change. The Calipers will not open wide enough to install new pads. Only enough to get the existing pads out for other repairs. 3.
  • Page 10 4. Change the pads. 5. Activate the brakes as instructed earlier. 6. Use UP/DOWN button to select Adaptation from Select Function menu and press ENTER button. >5) Adaptation 6) Function Test 7. Wait a few seconds until following screen shows: 03mm DOWN Button or UP button = Change N = Exit Y = Confirm...
  • Page 11 Erase Codes (Other Audi) CAUTION: Do not erase the codes before the system has been checked completely by a technician. This function is performed with Key on Engine off (KOEO). Do not start the engine. 1. To erase codes select #2 on the menu, you’ll be prompted to confirm. Use the up/down button to select your choice.
  • Page 12 WARNING: The EPB system must be activated after finishing service work on the brakes. Make sure the vehicle is properly blocked before activation of the system. 1. To close the brake pads after finishing the maintenance/service work on the brakes, use UP/DOWN button to select Activate Brake from Select Function menu and press ENTER button.
  • Page 13 3. View DTCs and their definitions on screen. 4. If more than one DTC is found, use UP/DOWN button, as necessary. If no codes are detected, a No codes are stored in the module message displays on the screen. If a code appears with no definition refer to the vehicles service manual.
  • Page 14 Make sure the vehicle is properly blocked before activation of the system. 1. To close the brake pads after finishing the maintenance/service work on the brakes, use UP/DOWN button to select Activate Brake from Select Function menu and press ENTER button.
  • Page 15 voltage drops too low to support the operation, a STOP: Voltage at control unit SBC xx.xV (minimum 12.47V) message indicating battery low is displayed. If the voltage stays at a low level, the device is not able to proceed with the service work. So stop the service by holding EXIT button for at least 1 second, and an Operation failed message will be displayed.
  • Page 16 19. Follow onscreen instructions to finish the seventh phase. Close bleeder screw at rear left brake caliper. Diagnose SBC On Mercedes Open bleeder screw at front left brake caliper. Operate brake pedal at least 5 times and release again (pump). Stop pumping once the brake fluid flows out free of bubbles.
  • Page 17 separate hydraulic circuit. Important: Do not operate the pedal until you are prompted to do; otherwise the service may not be completed. 1. Use UP/DOWN button to select Inspect Brake Air from Select Function menu and press ENTER button to confirm. 5) Change Brake Fluid >6) Inspect Brake Air 7) ECU Information...
  • Page 18 2s to exit, and a User Aborted message shows on the display. Whenever you operate the pedal too hard and the pressure is raised beyond the specified range of current phase, following screens come up prompting you to repeat the process to try again: 1) Brake pressure must not rise beyond the specific range! 2) Repeat the process 3) Press Y or gently actuate and then release the brake pedal to continue...
  • Page 19 ^ Hold pressure within black range for 5 seconds. 23. Actuate the pedal gently to raise the pressure to 20-24 bar and keep it for 5s. 24. Follow onscreen instructions to complete current phase of operation: The fill level of wheel brake circuit HZ2 (secondary brake circuit) is in order. Release brake pedal.
  • Page 20 ID: 00/06 3. Press any key to return. Diagnose Volvo PBM The EPB Service Tool is able to deactivate/activate PCM functions, change brake fluid/bleed brake system, inspect brake air, read/clear SBC trouble codes, and retrieve ECU information on Volvo vehicles that are equipped with the PBM brake system. Since Volvo’s PBM system is almost the same as the SBC on Mercedes, please review the detailed instructions for the Mercedes above.