Advertisement
Quick Links
Thank you for purchasing the Ford Camera Integration Module.
Before installing be sure to read these instructions.
Warranty for this product is 2 years from date of purchase, however warranty is void if:
•
Unit is tampered with, damaged or modified
•
Any cables in the kit are cut or modified
•
Reverse Camera is subjected to overvoltage
Warranty Terms
The Ford Integration module is covered by warranty for 2 years and includes:
•
Defective Equipment
Not covered under warranty:
•
Abuse
•
Improper installation
•
Alterations to cables
•
Accidents
Ford Sync 3 Camera Integration
Installation and User Manual
•
Defective cables
•
Water damage
•
Improper use
•
Labour
•
Postage costs
1
Advertisement
Related Manuals for Polaris Sync 3
Summary of Contents for Polaris Sync 3
- Page 1 Ford Sync 3 Camera Integration Installation and User Manual Thank you for purchasing the Ford Camera Integration Module. Before installing be sure to read these instructions. Warranty for this product is 2 years from date of purchase, however warranty is void if: •...
-
Page 2: Installation Notes
When pulling the dash apart, please use quality trim tools to avoid damaging your dash. Please do NOT cut any plugs off of any Polaris cables. Doing so will void your warranty! If you need to blend other brand cameras into our system, please call Polaris on 1300 555 514 so we can refer you to a recommended dealer who has the skill and experience in performing this type of work. - Page 3 How to pull the dash apart to access OEM Head Unit & Screen— Ford Ranger / Everest This is the recommended order to pull the dash apart: Please see individual photos below corresponding with their number above: 3. Put trim tool 3.
- Page 4 5. Place your hand on left side of 5. Place your hand on the long 5. You should now be able to the long trim and loosen by trim directly underneath the remove the entire panel with ease popping out carefully monitor and loosen by popping out carefully This is the recommended order to pull the final trim off:...
- Page 5 1. Remove the 2 screws underneath the air 2. Pull the trim off starting at the BOTTOM. Pull conditioning panel gently as you will need to disconnect the plugs from the back of the air conditioning panel 3. Remove all plugs from the back of the air 4.
- Page 6 DipSw Settings The DipSw settings are already pre-set for a Ford Ranger. If you are fitting into a another Ford vehicle, please make sure you refer to the DipSw settings and change accordingly...
- Page 7 DipSw Settings (Continued) Dip SW See Below Down Ford Ranger with Sync 3: September 2016 – 2021 Dip SW Down Ford Ranger with musical note on steering wheel control (See figure 1). Dip SW Down Ford Everest: September 2016 – 2021...
- Page 8 Camera Wiring Polaris Caravan Camera Kit—All Polaris parts Caravan Camera Kit—Converting A frame generic style plug to Polaris WOZA socket Caravan Camera Kit—Using an adaptor to plug into A frame generic style plug (NO WOZA setup) GENERIC CAM TO POLARIS CAMERA 7M EXT.
-
Page 9: Interface Setup
Programming Interface Setup Reset Exit Front Camera Side View Reverse Camera Parking Assist Version Factory Reset Front Camera: Select 5 and select EXIT to save Caravan Camera: Select EXT and select EXIT to save Default settings out of box: Front Camera 0 / Reverse Camera EXT Camera Activation—Ford Ranger 2016-2021 (Other vehicles may differ—See page 11) Back to your main head... - Page 10 Caravan Camera & Front Camera (2 cameras) Hold in button for 3 seconds: Front Camera will appear first. Hold in button for another 3 seconds and caravan camera will appear. Reverse Gear Combinations Factory Screen Select reverse Factory camera Hold button Van camera will will appear...
-
Page 11: Camera Activation
Camera Activation Ford Ranger Sept 2016—2021 Ford Everest Sept 2016—2021 Ford Ranger with musical note on steering wheel control...