DUPLICATING A VIDEO TAPE
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
1
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
CONNECTION TO ANOTHER VCR
PLAYBACK VCR
VIDEO OUT
AUDIO OUT
AUDIO/VIDEO CORD (NOT SUPPLIED)
Press the REC button and the
3
PLAY button simultaneously
on the remote control or the
REC button on the TV/VCR, then
press the PAUSE button.
PLAY
REC
•
NOTE:
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
46
RECORDING TV/VCR
VIDEO IN
AUDIO IN
4
Press the PLAY button on the
playback VCR.
PAUSE
2
Press the INPUT button twice select AUDIO/
VIDEO input position, The "LINE" will appear on
the screen.
INPUT
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer's instructions. A typical
camcorder dubbing hookup is shown below.
PLAYBACK
CAMCORDER
To AV Jack
AUDIO/VIDEO CORD
(NOT SUPPLIED)
PLAY
RECORDING TV/VCR
To VIDEO/AUDIO IN
Press the PAUSE button
5
on the TV/VCR to begin
the duplicating process.
PAUSE
LINE