4.6.2
Online User
The "Online User settings page shows a log of all IP addresses connected to the camera, including the username
being used. If needed, users (including Administrators) can be disconnected from the camera by an admin
account by pressing the "Kick-off" button next to the applicable entry.
4.6.3
Block and Allow Lists
Users can list IP addresses allowed or not permitted to access the camera.
To setup IP filtering, check the box next to "Enable address filtering" and enter the information in the box below.
Choose whether to allow or block an address by clicking on the appropriate option above the list window.
Users can add an IPv4, IPv6 or a MAC address to the allowed and blocked lists.
Once users add the address, press the "Add" button to add it to the list.
-37-