Wi-Fi Module Illuminating Led's; Wall Control Configuration; Step 1: Magiqtouch Wall Controller Configuration - Seeley MagIQtouch Original Instructions Manual

WI-FI MODULE ILLUMINATING LED'S

ILL2698-B

WALL CONTROL CONFIGURATION

STEP 1: MAGIQTOUCH WALL CONTROLLER CONFIGURATION

If this is a new installation go through the MagIQtouch wall controller
installation wizard. If adding MagIQtouch WI-FI Smart controller as an
upgrade go to step 2 below.
When the MagIQtouch wall controller detects the MagIQtouch WI-FI
Smart Controller (WI-FI IOT Device) the screen should display the
following;
ILL2699-A
If 'WI-FI IOT DEVICE' is not displayed as above check the following;
• Check mains power to MagIQtouch WI-FI Smart Controller – Green
light illuminated on left side.
• Communications cable are fitted correctly.
• MagIQtouch wall controller is connected to WI-FI controller.
• Press 'Retry'.
MagIQtouch Controller INSTALLATION MANUAL | 4