Cycle Parameters Cycp; Low Power-Auto Shutdown 1 Days Enable Lpas 1; Low Power-Auto Shutdown 2 Days Enable Lpas 2 - ALLIANCE HWNNE2HP115CW01 Original Instructions Manual

the number of minutes to be added to steps that have Rinse 1
selected as their status.
7. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the current number of minutes
8. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.

Cycle Parameters CyCP-

This option allows the owner to set the amount of time for vari-
ous steps in each type of cycle. For programmable options refer
to table below.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until CyCP- appears in the
display. Press the START (enter) keypad and CyCP 1 will
appear in the display.
4. When CyCP 1 appears in the display, press the START (en-
ter) keypad. The current number of minutes set will appear in
the display.
5. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the current number of minutes shown in
the display to the desired number of minutes.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Programmable Options
Option Display
CyCP 1
CyCP 2
CyCP 3
CyCP 4
CyCP 5
CyCP 6
CyCP 7
CyCP 8
CyCP 9
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Description
Normal Wash Agitate Time
Normal Rinse Agitate Time
Normal Extra Rinse Agitate
Time
Normal Final Spin Time
Perm Press Wash Agitate Time
Perm Press Rinse Agitate
Time
Perm Press Extra Rinse Agi-
tate Time
Perm Press Final Spin Time
Delicate Wash Agitate Time
Table continues...
Option Display
CyCP 10
CyCP 11
CyCP 12
CyCP 13
CyCP 14
Low Power-Auto Shutdown 1 Days
Enable LPAS 1
This option allows the owner to set Low Power/Auto Shutdown
on certain day(s) of the week. Low Power and/or Auto Shutdown
days/duration are programmed using an external device or net-
work.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until LPAS 1 appears in
the display.
4. When LPAS 1 appears in the display, press the START (en-
ter) keypad. The current Low Power/Auto Shutdown 1 Days
Enable status will appear in the display.
on = Option Enabled
oFF = Option Disabled (factory default setting)
5. Press the DELICATES (∧) or the COLD (∨) keypad to change
the current status.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Low Power-Auto Shutdown 2 Days
Enable LPAS 2
This option allows the owner to set Low Power/Auto Shutdown
on certain day(s) of the week. Low Power and/or Auto Shutdown
days/duration are programmed using an external device or net-
work.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
61
Programming Control
Description
Delicate Rinse Agitate Time
Delicate Extra Rinse Agitate
Time
Delicate Final Spin Time
Warm Rinse Option Global
Timed Hot Fill/Spray Rinse
Part No. 204370ENR1