Setting Rebound Damping On The Fox Dpx2; Setting Air Pressure On The Fox 38 Fork - PIVOT cycles SHUTTLE Original Operational Instructions

Setting Rebound Damping on the Fox DPX2

• Rebound is set from the most open (fully counter-clockwise) position.
• The rebound setting is determined by the air pressure in the shock.
• Refer to the table below for the suggested rebound setting. The number in the chart
refers to how many clicks in (clockwise) from the open setting the rebound should be set.

Setting Air Pressure on the Fox 38 Fork

• Fox recommends setting sag between 15% and 20% of the total fork travel. The Shuttle comes with a
160mm fork, so the proper sag measurement is 24.0 - 32.0mm.
• The air pressure in the Fox 38 fork should not exceed 8.3 [bar] (120 [psi]).
• To achieve the proper sag, reference the chart below for an initial starting point.
www.pivotcycles.com
AIR PRESSURE
[bar] [psi]
< 8.3 <120
8.3 - 9.7 120-140
9.7 - 11 140-160
11 - 12.4 160-180
12.4 - 13.8 180-200
13.8 - 15.2 200-220
15.2 - 16.5 220-240
16.5 - 17.9 240-260
17.9 - 19.3 260-280
19.3 - 20.7 280-300
Clicks from OPEN (Clicks from CLOSED)
RIDER WEIGHT
[kg] [lbs]
55 - 59 120 - 130
59 - 64 130 - 140
64 - 68 140 - 150
68 - 73 150 - 160
73 - 77 160 - 170
77 - 82 170 - 180
82 - 86 180 - 190
86 - 91 190 - 200
91 - 95 200 - 210
95 - 100 210 - 220
100 - 105 220 - 230
105 - 109 230 - 240
109 - 114 240 - 250
info@pivotcycles.com
SUGGESTED REBOUND
SETTING
3 (11)
4 (10)
5 (9)
6 (8)
7 (7)
9
(5)
10 (4)
12 (2)
13 (1)
CLOSED
FOX 38
AIR PRESSURE
72 [psi] / 5.0 [bar]
76 [psi] / 5.2 [bar]
80 [psi] / 5.5 [bar]
84 [psi] / 5.8 [bar]
89 [psi] / 6.1 [bar]
93 [psi] / 6.4 [bar]
97 [psi] / 6.7 [bar]
102 [psi] / 7.0 [bar]
106 [psi] / 7.3 [bar]
110 [psi] / 7.6 [bar]
114 [psi] / 7.9 [bar]
119 [psi] / 8.2 [bar]
123 [psi] / 8.5 [bar]
1.877.857.4868
BIKE SET-UP
4