Low Power Indicator - Razer RZ01-0335 Product Manual

GETTING STARTED
CHARGING YOUR MOUSE
Plug the charging cable from your computer's USB port to your Razer DeathAdder Pro. For best results,
please fully charge the mouse before using it for the first time. A depleted battery will be fully
charged in approximately 4 hours.
This connection also acts as the wired mode for your Razer device. The Razer DeathAdder Pro
requires a USB connection that can supply sufficient power to charge the device. The charging
process may be affected when connecting to a non‐powered USB hub or non‐powered USB
mostly found on keyboards and peripherals. It's recommended to always connect the Razer
DeathAdder Pro directly to the USB port of your computer.

LOW POWER INDICATOR

The Razer logo will blink red twice in repeated intervals to indicate that its battery's power is less than
5%. This lighting sequence will repeat until the battery is drained or the mouse is connected to the PC
via the charging cable.
F O R G A M E R S . B Y G A M E R S .
™
3