Uplift Desk Crestview MON010-2 Quick Start Manual

Crestview Dual Monitor Arm
Base
SKU: MON010-2, MON032
Package Contents Package Contents
Base
Upper Clamp
Base Lower Arm
Adhesive Pad
Upper Clamp
Adhesive Pad Upper Clamp
Note: ACCEPTABLE MONITOR WEIGHT RANGE IS 2.2 to 33 lb. (per monitor)
Adhesive Pad
Lower Clamp
Lower Clamp
Wire Cover
Lower base plate
Wire Cover
Clamp Base
Lower base plate
© UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com
Upper Clamp
Vesa mount (x1)
Adhesive Pad
Base
Vesa mount (x1)
Base
Base
Upper Arm
Upper arm
Base
(qty 2) (qty 2)
Upper Clamp
Base Vesa mount (x1)
Upper Clamp
Upper Clamp
Lower Clamp
Adhesive Pad
Upper Clamp
Upper Clamp
Lower Clamp Lower Base Plate
Adhesive Pad
Upper arm
Upper arm
Lower Clamp
Adhesive Pad
Lower arm
Lower Clamp
Adhesive Pad
Lower arm
Wire Cover
Wire Cover
Adhesive Pad
Lower Clamp
Wire Cover
Upper base plate
Lower base plate
Wire Cover
Lower base plate Upper base plate
Lower arm
Lower base plate
Lower Clamp
Bar
Lower base plate
Lower Clamp
Upper base plate
Wire Cover
Wire Cover
Lower base plate
Bolt-Through Base
Lower base plate
Adhesive Pad
Lower Clamp
3mm Allen wrench
Upper arm
L
Vesa mount (x1) Lower Clamp
Wire Cover
Base Vesa mount (x1)
3mm Allen wrench
3mm Allen wrench
Vesa mount (x1) L
L
Vesa mount (x1) 3mm Allen wrench
3mm Allen wrench 4mm Allen wrench
VESA Plate
Upper Clamp L M
L
Base screw (x4)
Vesa mount (x1) Upper arm Base screw (x4)
Lower arm
(qty 2)
3mm Allen wrench 4mm Allen wrench 6mm Allen wrench
L M N
Adhesive Pad
M4x12 bolt (x4)
Upper arm Base screw (x4)
3mm Allen wrench 4mm Allen wrench 6mm Allen wrench
L M N
Lower arm
Wire Cover
Lower base plate
M4x12 bolt (x4)
Upper arm Base screw (x4) M5x12 bolt (x4)
Lower Clamp
Upper base plate
Upper arm Wire Cover Base screw (x4)
Lower arm
M4x12 bolt (x4) D5 Washers (x4)
Base screw (x4) M5x12 bolt (x4)
Wire Cover
Base screw (x4)
Upper base plate
Upper arm
Lower arm
N Bolt (x4)
Upper base plate
Lower base plate
Bar
Lower base plate
N Bolt (x4)
O Bolt (x4)
Upper base plate
Bar Handle
Step 1
Lower arm
Bar Handle
If you purchased the Crestview Monitor Arm Wiring
Lower arm
Kit, assemble that FIRST, before proceeding. Refer to
Handle
Bar
the separate instructions contained in the Crestview
Monitor Arm Wiring Kit (ACC076) package for com-
Upper base plate
plete details.
Upper base plate
Step 2
There are two ways to attach the Crestview Dual Mon-
Bar
itor Arm to your desktop.
If you would like to attach the monitor arm along the
back edge of your desktop, follow the Clamp Base
Assembly instructions (Step 2.1 - 2.3) and ensure your
desk is between 0.4" and 3.3" thick.
If you prefer to attach the monitor arm through your
desktop, follow the Bolt-Through Base Assembly in-
structions (Step 2.4 - 2.7) and ensure your desk is be-
tween 0.4" and 1.8" thick.
Step 2.1 - Clamp Base - only complete steps 2.1 to
2.3 if clamping the monitor arm to the edge of your
desktop. There is also a Bolt-Through option that
starts on step 2.4.
Align the Upper Clamp with the Base in the orienta-
tion shown. Attach using four M6x12 Flathead Screws
and the 4mm Allen Wrench.
Then peel the adhesive backing off of the Adhesive
Pad and attach it to the bottom of the Base and Upper
Clamp as shown. Align the pad with the front edge of
the Base first, then work to the back.
Upper Clamp
3mm Allen wrench
L
Lower arm
Adhesive Pad
4mm Allen wrench 6mm Allen wrench
Base screw (x4)
M N
Upper base plate
Allen Wrenches
4mm Allen wrench
Lower Clamp
4mm Allen wrench 6mm Allen wrench
(set of three: 3mm, 4mm, 6mm) M N
M
4mm Allen wrench 6mm Allen wrench
3mm Allen wrench
6mm Allen wrench
M6x12 Flathead Screw
N
M N
M4x12 bolt (x4)
L
M5x12 bolt (x4)
M4x12 bolt (x4) M5x12 bolt (x4) D5 Washers (x4)
M4x12 Screw (M-A)
D5 Washers (x4)
M5x12 bolt (x4)
M5x12 Screw (M-B)
N Bolt (x4)
O Bolt (x4)
D5 Washers (x4)
Bar
Wire Cover
M5 Washer (M-C)
M4x12 bolt (x4)
N Bolt (x4)
M4x12 bolt (x4)
O Bolt (x4)
M5x12 bolt (x4)
Base screw (x4)
O Bolt (x4)
Handle
Lower base plate
N Bolt (x4)
Handle
Handle
4mm Allen wrench 6mm Allen wre
M N
Upper arm Base screw (x4)
M4x12 bolt (x4)
Lower arm
6mm Allen wrench
Part for
N
Bolt-through assembly
4mm Allen wrench 6mm Allen wr
(qty 4)
Upper base plate
D5 Washers (x4)
M N
(qty 8)
N Bolt (x4)
Upper Base Plate
(qty 8)
Handle
(qty 8)
M5x12 bolt (x4)
D5 Washers (x4)
M4x12 bolt (x4)
Bar Handle
Bar
O Bolt (x4)
Upper arm
N Bolt (x4)
M5x12 bolt (x
Lower arm
Upper base p
O Bolt (x4
D5 Wash
M5x12 bolt
1