Related Manuals for Audio Technica ATW-DA49
Summary of Contents for Audio Technica ATW-DA49
-
Page 1: Wireless Systems
Professional UHF Wireless Systems ATW-DA49 Diversity UHF Antenna Distribution System, 440-900 MHz Installation and Operation... - Page 2 Pour prévenir feu ou choc électrique, ne pas exposé l’appareil à la pluie ou à l’humidité. The ATW-DA49 is a UHF active unity-gain diversity antenna distribution system that enables one pair of antennas to feed multiple wireless systems. One ATW-DA49 unit can support up to four wireless receivers.
- Page 3 OFF position. If you have an antenna system that requires power (such as an antenna preamp or booster) you must open the ATW-DA49 assembly and activate a switch on the circuit board. See Fig. C. (This enables the antenna distribution system to pass power through to the antenna.) Current consumption of the preamp or booster should...
-
Page 4: Specifications
ATW-DA49 Set up (Fig. E) 12. +12V DC power is supplied through the ATW-DA49 Antenna Distribution System to each receiver. 13. Channel “B” distribution output connects to antenna “B” input jack on receiver. 14. Channel “A” distribution output connects to antenna “A”...
Need help?
Do you have a question about the ATW-DA49 and is the answer not in the manual?
Questions and answers