Table of Contents
Advertisement
Incredible but true. Only when you use it will you believe what it does.
Accessory for BLUNIK II version 4.03 and above. Connect and go. With
connection cable included. If you have other accessories connected,
you will need a Multi-Cable Accessory.
The options and parameters related with SPORT CALCULATOR are configured
with the Blunik when the device is connected. (Plug and Play style).
NOTE
This is a device for advanced navigators. We recommend you practice with it
before going on a rally.
6.33. B-ACUSTIC DRIVE
Acoustic warning for regularity and changes of average.
Did you know that acoustic signals reach our brains more quickly? The
quicker you have the information, the quicker you react and/or are aware of
the changes of average.
Acoustic warning for regularity.
"Piiiu, piiiu"
if you are behind.
"Pooow, pooow"
Blunik
II
Accessory.
and go.
With connection cable
included. If you have other
accessories connected, you will
need a Multi-Cable Accessory.
Te avisa acústicamente de los cambios de media, del atraso y/o del adelanto
que llevas.
Automatic acoustic warning of the changes of average, of the delay and/or
advance that you have.
If you are the driver and you are concentrating on the road, the information
reaches you at the ideal moment without you noticing. It is a great help in
regularity while you concentrate on the road.
If you are the navigator and at stressful times you worry about not
coping with everything, the ACOUSTIC DRIVE does it for you: a bleep and the
regularity continues!
Ideal for those on motorbikes.
· 54·
if you are ahead.
Connect
Advertisement
Table of Contents
Need help?
Do you have a question about the Trip II PLUS and is the answer not in the manual?
Questions and answers
Blunik II Plus new installation in another car. You delivered the cable and the sensors ( probe ) We installed the calibration. Problem: "probe fail" appears periodly on the screen. ( approx. all 20 sec.for 2 sec. ) The measuring of the kilometers stops, but after 2 sec. the accumulated kilometers are correct. ( counted in the background ? ) What could be the reason ?? Thanks for your help
The "PROBE FAIL" message on the Blunik Trip II PLUS could appear periodically after installation in another car due to serious sensor anomalies. Possible causes include:
1. Mechanical issues with the wheel sensors – The sensors may not be properly mounted, aligned, or secured.
2. Connection problems – Loose or faulty wiring may cause intermittent disconnections.
3. Incompatibility with the new vehicle – The sensor setup may not match the car’s wheel configuration.
4. Calibration errors – Incorrect calibration settings could lead to inconsistent sensor readings.
The issue should be resolved by checking and fixing any mechanical problems with the sensors immediately.
This answer is automatically generated