Advertisement
WEEK NUMBER ROLLOVER - FIRMWARE UPDATE
Due to the "Week Number Rollover" (WNRO) it is possible that the Grundig navigation
system shows a different date after the 6
of April. Occasionally it can also happen
th
that other irregularities (will) occur.
The WNRO takes place once every 19 years. The rollover is a result of the internal
satellite storage numerator. The numerator of these satellites jumps back to zero
after every 19.7 years.
Irregularities that occur due to the WNRO, could be solved by performing this
firmware update.
Unfortunately, not all Grundig navigation systems can get a new firmware update.
This firmware update is suitable for the Grundig M6, M8 and M10.
The update is NOT suitable for the Grundig MF1, M1 and DP1.
GRUNDIG M5:
Not every M5 is suitable for a firmware update.
Look closely at the model of a Grundig M5! The difference in model is best shown at
the back of the M5.
A firmware update is only suitable for this model:
A firmware update is NOT suitable for the following model:
Advertisement
Table of Contents
Related Manuals for Grundig M5 2042 15104239
Summary of Contents for Grundig M5 2042 15104239
- Page 1 GRUNDIG M5: Not every M5 is suitable for a firmware update. Look closely at the model of a Grundig M5! The difference in model is best shown at the back of the M5. A firmware update is only suitable for this model:...
- Page 2 OF 8 GB OR LESS SHALL BE REQUIRED. PROCEDURE FOR PERFORMING THE FIRMWARE UPDATE: 1. Create a folder on the desktop of your computer and name it "Grundig firmware". 2. Click on this download link: The firmware is now being downloaded.
- Page 3 6. Then copy the rest of the files to the micro SD card. 7. Take the Grundig navigation system and do NOT switch it on. Also make sure that the Grundig navigation system is not connected to any power supply.
- Page 4 The firmware update is now ready.
Need help?
Do you have a question about the M5 2042 15104239 and is the answer not in the manual?
Questions and answers