Installing an Inverter (support-mounting is used as an example)
1.
Determine the hole positions on the support
based on rear panel dimensions.
Unit: mm
3.
Secure the rear panel.
M10 (3 PCS)
30 N· m
5.
Tighten hexagon bolts.
NOTE
1.
The antitheft lock is prepared by customers.
2.
For details about wall-mounting the device, see the
SUN2000 (8KTL-28KTL) User Manual.
All manuals and user guides at all-guides.com
2
2.
Drill holes.
4.
Mount the inverter on the rear panel.
6.
(Optional) Install an anti-theft lock.