Table of Contents
Advertisement
Programme (main menu)
Pre-wash
Settings (sub-menu)
Mini 30' 35°C
Delicate 40°C
Economy 50°C
Bio 55°C
Intensive 70°C
Hygiene+ 70°C
Mix wash
Settings
Settings
Language
Language
: German
23
All manuals and user guides at all-guides.com
Menu structure
Language
Water hardness
1
4
0
4
Volume
Brightness
1
7
Contrast
0
15
Melody
1
3
Factory settings
Factory settings?
Settings
You can use the “Settings“ programme to select the
language, the water hardness, the signal noise level, the
brightness, the contrast, and the signal melody, or to
reset the dishwasher back to the factory (default) settings.
Calling up the “Settings” programme:
1. Use the On/Off button
to turn the device on.
1
2. Turn the programme selector knob
3
shown in the multifunction display.
3. To access the programme, press the programme button
4
.
4. To exit the programme, press the time delay button
When you have reached the “Settings” menu item:
1. Press the programme selector knob
menu item (language, water hardness, volume,
brightness, contrast, or melody) is shown.
2. Use the programme button
to access the appropriate
4
sub-menu.
3. In the sub-menu, turn the programme selector knob
3
until the desired setting/selection appears.
4. Press the programme button
to confirm this setting.
4
5. Use the Time Delay button
to exit the programme.
5
Languages (sub-menu)
Turkish
English
German
French
Italian
Spanish
Danish
Dutch
Swedish
Norwegian
Factory Settings
until “Settings” is
.
5
until the desired
3
You can use the Language programme to select one of
nine languages in addition to German: Turkish, English,
French, Italian, Spanish, Danish, Dutch, Swedish or
Norwegian.
Use the Water Hardness programme to set the
dishwasher to one of four degrees of water hardness
1 – very soft, 2 – soft, 3 – medium and 4 - hard. For
perfect cleaning and drying results, the dishwasher must
be set to the proper water hardness for your location. To
do this, please also read “Softening Water“ (page 6).
Use the Volume programme to select one of five different
sound levels for the signal at the end of the washing
programme: 0 - off, 1 – very quiet, 2 - quiet, 3 – medium
and 4 - loud.
Use the Brightness programme to set the brightness of
the multifunction display within a range of 1 - 9.
Use the Contrast programme to set the contrast of the
multifunction display within a range of 0-15.
Use the Melody programme to choose one of three
different melodies to signal the end of the washing
programme.
Use the Factory Settings programme to set the
dishwasher back to its factory settings:
1. Using the programme selector knob
3
Settings" in the “Settings“ sub-menu.
2. To access the programme, press the programme button
.
4
3. Press the programme button
4
to confirm that you
want to set all settings back to the factory settings.
4. Press Time Delay
to exit the programme.
5
The factory settings are:
language = English, water hardness = 3, volume = 3,
brightness = 7, contrast = 5 and melody = 3.
, select "Factory
2
Advertisement
Table of Contents
