Sealey AP875 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using workbenches
‰
and associated workbench drawers.
WARNING! Use the workbench on level and solid ground, preferably concrete. Avoid tarmacadam since the workbench may sink into
‰
the surface.
Locate the workstation in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the workstation clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
Take care when assembling sharp edges.
9
DO NOT remove a fully loaded drawer.
8
DO NOT use the workstation drawer for any purpose other than that for which it is designed.
8
DO NOT use the workstation out of doors.
8
DO NOT get the workstation drawers wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the workstation drawers with any solvents which may damage the painted surfaces.
8
NOTE: The assembly of this product may require two people.
2. INTRODUCTION
Industrial single drawer workstation, ideal for site workers or line managers and supervisors. Workstation features a 5° sloped surface
allowing a better angle to write on, with a raised lip on the lower edge to prevent items sliding off. A lockable ball bearing slide drawer is ideal
for keeping valuables, stationary or paperwork safe. Three pigeon holes are suitable for keeping paperwork or manuals on hand and in order,
or as in and out trays. Adjustable feet ensure the unit sits level, even if your floor is not. Lower shelf allows for items such as workwear to be
stored and on hand. Supplied with two keys. Some simple assembly required.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . AP875
Overall Size (W x D x H): . . . . 875 x 755 x 1350mm
Drawer (W x D x H): . . . . . . . . . .585 x 685 x 115mm
Pigeon Hole (x3) (W x D x H): . . 290 x 215 x 80mm
Shelf (W x D): . . . . . . . . . . . . . . . . . . . .870 x 380mm
Nett Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . 33.62kg
4. OPERATION
4.1. Take all the components out of the carton
and compare to the parts list.
Parts List Description
A Desk Hood
B Desk Top
B1 Drawer
B2 Desk Top Assembly
C Leg
D Lower Shelf
E Shelf Supports
F Adjustable Feet
✳ Nuts / Bolts
▲ Drawer Lock
© Jack Sealey Limited
INDUSTRIAL WORKSTATION 1 DRAWER - GREY
MODEL NO:
Wear safety
footwear
Qty.
1
1
1
1
4
1
2
4
30
(not shown)
1
(not shown)
Original Language Version
AP875
fig.1
AP875 | Issue 2 (H,F,3) 12/02/2019