Chapter 28: Replacing The Power Button With Fingerprint Reader; Procedure; Post-Requisites - Dell XPS 13 9305 Service Manual

Replacing the power button with fingerprint
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Place the fingerprint-reader board into its slot on the palm-rest assembly.
2. Place the power button into its slot on the palm-rest assembly.
3. Pressing down on the power button, replace the two screws (M1.4x1.7) that secure the power button to the palm-rest
assembly.
4. Adhere the power button cable to the keyboard.
5. Replace the screw (M1.6x1.5) that secures the fingerprint-reader board to the palm-rest assembly.

Post-requisites

1. Replace the system board.
2. Replace the fans.
3. Replace the solid-state drive.
4. Replace the battery.
5. Replace the base cover.
56 Replacing the power button with fingerprint reader
computer. After working inside your computer, follow the instructions in
28
reader
After
www.dell.com/