Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EchoStar HDS-600RS
Summary of Contents for EchoStar HDS-600RS
- Page 1 HDS-600RS DiSEqC™ Operation...
-
Page 2: Table Of Contents
Contents 1. Overview..................3 2. Changes to the Setup Wizard............4 DiSEqC™ setup screen 1 ..............5 DiSEqC™ setup screen 2 ..............6 DiSEqC™ setup screen 3 ..............7 3. MANUAL CONFIGURATION ............8 4 DiSEqC™ Configurations Supported ........10 4.1 Symmetrical Setup ..............10 4.2 Single Tuner mode ..............10... -
Page 3: Overview
DiSEqC™ switches used in multi-satellite dish systems. The HDS-600RS is a dual tuner receiver and it is important to note that a symmetrical system of DiSEqC™ switches must be used on LNB1 and LNB2 inputs. -
Page 4: Changes To The Setup Wizard
2. Changes to the Setup Wizard The Setup wizard has been changed to allow users of DiSEqC™ equipment to enable DiSEqC™ on the HDS-600RS. DiSEqC™ control can also be enabled in the setup menu if not enabled in the Setup Wizard. -
Page 5: Diseqc™ Setup Screen 1
DiSEqC™ setup screen 1 Please enter the type of switch you are connected to. • Green = Tone burst (Legacy) • Yellow = DiSEqC™ 1.1 switch setup • Restarts wizard. Note: before setting up the connection it is important to identify if the DiSEqC™... -
Page 6: Diseqc™ Setup Screen 2
DiSEqC™ setup screen 2 Allows the user to enter the number of input ports on the DiSEqC™ switches. • Green = • Yellow, = • Blue, • Restart Setup Wizard... -
Page 7: Diseqc™ Setup Screen 3
Green, = • Yellow, = • Blue After this stage, the HDS-600RS will check for the home transponder on both inputs. When this completes, the use is given on one of two options • Existing scan screen • Existing signal error screen Note: If the home transponder cannot be seen on tuner 2, the usual warning screen will be displayed. -
Page 8: Manual Configuration
3. MANUAL CONFIGURATION The DiSEqC™ menus can be used to configure the DiSEqC™ settings when an existing Freesat system is expanded to include multiple satellite dishes. These follow a similar confirmation sequence to that described in the Wizard setup. To enter the DiSEqC™ setup screen press the Main Menu key on the remote &... - Page 9 Select Manual Scan to display the following screen: Select the appropriate parameters to correspond to the physical DiSEqC™ switch configuration and desired Satellite services. Select the Scan option, followed by “Start Scan” to tune to the desired programmes. Programmes will be stored from Channel 5000 upwards. Press the Back key &...
-
Page 10: Diseqc™ Configurations Supported
All other brand and product names are or may be trademarks of, and are used to identify products or services of, their respective owners. Copyright © 2012 EchoStar Technologies L.L.C. EchoStar Europe, Beckside Design Centre, Millennium Business Park, Station Road, Steeton, Keighley, West Yorkshire BD20 6QW.
Need help?
Do you have a question about the HDS-600RS and is the answer not in the manual?
Questions and answers