Video Loss - D-Link JustConnect DNR-4020-16P User Manual

Section 3 - Configuration
On this page you can enable an alarm to trigger when video loss occurs.
Channel
Select the channel to configure.
Enable Video
Toggle this to cause video loss to trigger an alarm.
Loss
Event Actions
Select the event(s) the alarm should trigger from the following
list:
• Email: Send an email notification
• Buzzer: Trigger a buzzer sound
• Popup Message: Display a notification in a popup window
Enable Alarm
Trigger a notification on the Alarm Out interface(s).
Out
Enable Event
Toggle to keep a record of alarm events.
Recording
Detection
Enable or disable the alarm according to a particular schedule.
Schedule
D-Link DNR-4020-16P User Manual

Video Loss

41