Summary of Contents for ARCA LS100
-
Page 1: Operator Manual
La presente documentación es solo para el personal técnico, el cliente recibe una guía en su caja junto con su dispositivo. Operator Manual... - Page 2 The company reserves the right to carry out technical modifications without notice. ARCA will not be liable for direct, indirect, accidental or any other damages occurring at supply level or resulting from the use of information contained in the manual.
-
Page 3: Eu Declaration Of Conformity
EU Declaration of Conformity The Manufacturer: ARCA Technologies s.r.l. Corso Vercelli 332 – 10015 Ivrea (To) Italy Declares under its sole responsibility that the product: Equipment category: Information Technology Equipment Product type: Image Scanning System Commercial name: LS100 fulfils the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the Directives:... -
Page 4: Disposal Of Product
Note Important information for the operator. External link The topic is described in details in the specified manual. Internal Link The topic is described in details in other pages of this manual. Operator Manual LS100... -
Page 5: Safety Warnings
The meaning of the symbols appearing on the labels is described in the following. Warning or Danger Do not introduce tools or other objects Risk of Electrocution Hot surface No long garments Tie long hair back Moving mechanisms Risk of crushing fingers Operator Manual LS100... -
Page 6: Table Of Contents
Functional groups and their position .................. 8 External parts and connector panel ................. 8 Internal parts ......................... 9 Installation ........................10 The LS100 package includes ..................10 Unpack the machine ..................... 10 Care of the final location ....................10 Removable document holder ..................10 Ink-jet installation ...................... -
Page 7: Introduction
In case the application requires first to process the code line and then to archive the image, the LS100 can read the code line and send it in the real time, store the image and send it afterwards in background. -
Page 8: Functional Groups And Their Position
4 - Adjustable Stop of the Document 5 - Document Holder 6 - Document Recovery bin 7 – Serial Interface (Factory use only) 8 - USB Connector 9 - Power Connector 10 - ON/OFF Switch 11 - Data Label Operator Manual LS100... -
Page 9: Internal Parts
Internal parts 1 - Image Scanning System 2 - MICR read head 3 - Magnetic Card Reader 4 - Ink-Jet System 5 - Automatic feeder Or Pinch Roller (in alternative) Operator Manual LS100... -
Page 10: Installation
Installation The LS100 package includes: • LS100 image scanner unit • User guide • Desktop power supply and power cord • Ink-jet cartridge (only with ink-jet option present) • Document holder • USB Cable Unpack the machine: • Open the top of the box •... -
Page 11: Ink-Jet Installation
Ink-jet installation • Open the top cover of the LS100 • Predispose the HP51604 cartridge following the HP instructions • Insert the cartridge making sure that it remains flat on the guide • Pull up the plastic bridge with care until it is blocked into the correct place... -
Page 12: Use
The LED on the console lights up The LS100 beeps to signal that the interface cable is connected The LED continues to blink to indicate that the LS100 is ready to work ARCA provides software to test the LS100 reader... -
Page 13: Reading Documents
NO to insert documents with clips, tears, folds etc b) The CODE LINE is positioned below and facing the external side of the machine (A) c) The documents must be aligned correctly and inserted on the tray, as indicated by the green label Operator Manual LS100... -
Page 14: Reading The Magnetic Card
The Badge reader functions correctly in the two directions indicated Tuning the adjustable stop of the document The equipment ejects the read document into the recovery bin where you can withdrawing it. In case of a long document, move the adjustable stop (A) Operator Manual LS100... -
Page 15: Maintenance
Disconnect the power supply and the USB connection from the machine • Pull up the cover • Extract the jammed document with care, first pull it gently forward and then slightly upward • Place the cover in the correct position Operator Manual LS100... -
Page 16: Replacement Of The Ink-Jet Cartridge
Pull out the cartridge up to remove it • Insert a new INK-JET cartridge making sure that it rests flat on the guide • Pull the plastic bridge up until the cartridge is blocked into its seat Operator Manual LS100... -
Page 17: Cleaning The Scanner
Extract the external plastic cover (A) • Extract the trasparent plastic cover of the front scanner • Proceed with the cleaning using only neutral detergent for plastic • Replace the covers Warning Do not use alcohol based fluid or other organic solvents. Operator Manual LS100... -
Page 18: Ink-Jet Felt Pad
Take particular care to this operation because it requires to disassemble the body of the machine (external cover) • Remove the body of LS100 unscrewing the four screws in the floor pan of the machine • Take out the old felt pad using a pincers and slide it up •... -
Page 19: Troubleshooting
• Replace the cable itself • If the PC has a multiple USB ports, connect the LS100 to another port Check no feeling or multi-feeding occurs • Verify the correct alignment (horizontal and vertical) of the checks in the feeder Jammed check in the path •... -
Page 20: General Features
Illumination: RGB illumination Software tools Specific LS100 API interface, LSfamily scanners common API and API test program LS100 test program which also includes calibration procedures. All software tools and API work in: Windows XP / W2K / VISTA / 7 / 8 / 10 (x32 and x64 bit)
Need help?
Do you have a question about the LS100 and is the answer not in the manual?
Questions and answers