Chapter 1: About This Guide; Related Documents - Dell EMC Edge 510 LTE Installation Manual

This guide provides site preparation recommendations, step-by-step procedures for installing your device, and connecting to a
power source.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this
equipment.
NOTE: Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cables. Disconnect both power cables before servicing.
NOTE: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
NOTE: When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.
NOTE: Read this guide before unpacking the device. For unpacking instructions, see Unpack.
Regulatory
Topics:
•

Related documents

Related documents
For more information about the Dell EMC Edge 510 LTE, see the following documents:
● Dell EMC Edge 510 LTE Setup Guide
● Dell EMC Edge 510 LTE Release Notes
NOTE: For the most recent documentation, see the Dell EMC support site at www.dell.com/support.
4 About this guide
About this guide
1