Stereoping Synth Programmer Owner's Handbook Manual page 3

___________________________________________________________________________________________________________3
General features of the Synth Programmer
The Stereoping Programmer offers 45 control dials, 4 endless encoders and a 16x2 characters OLED display to
for convenient and intuitive sound shaping on your Matrix 1000 / 6 / 6R. At the moment you turn a knob, the
programmer sends the suitable command into your synthesizer which immediately changes it's sound.
Highly specialized hardware midicontroller for Oberheim Matrix 1000 / 6 / 6R
•
Optional CC-mode to send customizable Control Change commands (VSTi remoting)
•
Convertable from 19" rackmount to desktop usage – and back
•
45 dials, 4 encoders, 2x16 character oled display
•
Firmwareupdate over SysEx-Dump
•
Current draw 100 mA
•
Weight 2.650g
•
Size without rackmount brackets, incl. knobs and rubber feet ca. 430 x 130 x 85 mm
•
We highly recommend getting one of the firmware updates for your Matrix1000 or Matrix 6 described below.
Due to copyright isses you cannot get them from Stereoping directly though.
Features Matrix Edition
Visual design suitable to Matrix 1000
•
all Program parameters accessable from the Programmer
•
quick and simple access to the modulation matrix
•
patch change automatically updates the Programmers parameter memory
•
Targeted synth (M1000/M6) as well as Synthesizer's Firmware version selectable in Programmer's
•
preferences: for optimal response with each combination
'Midi CC' to 'SysEx'-translator to automate your Matrix with ordinary CC-messages
•
Patch-Randomizer
•
6 voice Chord Memory with 6 saveable Chord-Slots
•
Technical handling
The Synth Programmer was built to be used in a comfortable music studio environement. You can operate it
under free skies of course. But please keep in mind, it uses electricity for proper operation and therefore is quite
sensitive to water, drinks or other fluids. Excessive heat or exposition to sunlight is also not advised.
Your programmer has got a neat OLED display. The OLED technology is quite young. As none really can
guarantee how long it will keep it's perfect function after displaying the same content for hours or even days, we
integrated a screensaver to mutiply the lifetime of the display. If the programmer is not touched for longer than
23 minutes it will fall into screensaver mode and switch the OLED display off – the LEDs in the buttons above the
display will start to blink slowly. The programmer awakes immediately if a knob is moved or notes are being sent
through it.
Some 'No-need-to-worry' information: the datasheet of the display claims 50.000 hours until it has lost 50 % of it's
brightness. If you would use your programmer 5 hours on each day of the year this will take over 27 years – even with
deactivated screensaver.
Synth Programmer for Oberheim Matrix - Operation manual V 1.6 – 05/2020
© Stereoping Germany, Meschede 2020