Barbeques Galore Dakota Extension Table DAKEXTT250L Assembly Instructions Manual page 4

ASSEMBLY INSTRUCTIONS
STEP 1: Fit the LONG SCREWS (C)
Important: When moving the table and/or table top, lift and carry by the support frame
only, as lifting by the glass pieces may damage the table and/or the mechanism.
With the help of another person carefully place the TABLE TOP [A] upside down on a
soft clean surface e.g. a blanket.
Then as shown below take one LONG SCREW [C] and align the end thread into the
threaded hole in one corner of the underside of the TABLE TOP [A], turn the long screw
clockwise by hand 2 to 3 full turns to ensure the thread has engaged properly.
Check the thread has properly engaged by gently pulling upwards on the screw. Once
the screw is properly engaged, turn the long screw clockwise into the frame another 3 to
4 full turns. Note this screw does not have to touch the bottom of thread hole. Fit the
remaining 3 long screws in the same way.
4
DAKEXTT250L