8.1 Specifications for mounting
The TMA can be mounted behind the truck in two ways. Both of these ways were available during
the full scale crash tests and therefore acceptable. The following paragraphs clarify the possibilities
8.1.1 DIN mounting system
Please note that the DIN plate on the truck can also be mounted with 6 hitch pins for adjustment, or
bolted to the chassis. The DIN plate must be mounted to the supporting vehicle by Verdegro or an
official distributor.
Picture of the DIN mounting system on the TMA:
Typical DIN plate with the optional 6 pins for mounting on the truck:
Manual TMA-US-100K
Page 22 of 38