Sony BCU-100 Maintenance Manual page 39

After displaying the above test patterns for 15 seconds once again, the following dialog box is
displayed. Select "Yes" when the test patterns are displayed normally. If not, select "No".
Upon completion of the resolution check using the first resolution, the following dialog box is displayed.
If you want to continue the resolution check using another resolution, select "Yes". If you want to
exit the resolution check, select "No". When "Yes" is selected, the screen returns to the resolution
sub menu. Select the number that you want to check to proceed to the resolution check with another
resolution.
If "No" is selected, the screen returns to the "VIF-40 Board Check" after completion of the internal
processing taking some time.
EDID Read
Reads EDID (Extended Display Identification Data) of the connected monitor.
* The monitor should have been connected earlier beforehand. (The power can be turned off.)
If the readout is performed successfully, the message OK is displayed in the dialog box and the
following messages are saved in the log.
* The following shows an extract of the messages as an example.
==Vender/Product ID/EDID version
EISA manufacturer code
Product code
Serial number
Week of manufacture
Year of manufacture
EDID Structure version
EDID Revision
If readout has failed, the message NG is displayed in the dialog box.
At the same time, the VIF-40 board information is saved in the log file .
* The following shows an extract of the messages as an example.
VIF information
CS1 : exist
Product name
Board name
Serial Number
FPGA version
Board revision
Board type
Reg0001
Reg0002
Reg0051
Reg0052
BCU-100 MM
= 4DD9
= 02D0
= 0094EE2B
= 19
= 2006
= 1
= 3
: BC
: BB
: 01234
: 0104
: 0
: 0
: 82
: c0
: 40
: 00
1-31 (E)