Table of Contents
Advertisement
DS Multi-8
FUNCTIONS
Function Description
Perpetual date (leap year and month-end programmed
up to 2099) with: day, weekday, calendar week, month,
year.
T1
1st time zone.
T2
2nd time zone.
Option to select the time zone indicated by the hands.
Chronograph with split times, time addition and me-
mory.
Chronograph with lap times and memory.
Programmable countdown with acoustic or vibrating
warning.
ALARM A1
A1
Alarm for T1 with acoustic or vibrating warning.
ALARM A2
A2
Alarm for T2 with acoustic or vibrating warning.
S ET
Access to the watch parameters.
W W W. C E R TI NA.C O M
SELECTING THE FUNCTIONS
Display
Page
Digital
2
Hands
and/or
3
digital
Hands
and/or
3
digital
Hands
3
Digital
3
Digital
4
Digital
4
Digital
5
Digital
5
Digital
5
1/7
or
or
Press
Press
once
twice
A1
A2
S E T
or
After
1 second
After
1 second
3 28 _EN / 11 . 14
Advertisement
Table of Contents
Related Manuals for Certina DS Multi-8
Summary of Contents for Certina DS Multi-8
- Page 1 DS Multi-8 FUNCTIONS SELECTING THE FUNCTIONS Function Description Display Page DATE Perpetual date (leap year and month-end programmed Digital up to 2099) with: day, weekday, calendar week, month, year. Hands and/or 1st time zone. digital Hands and/or 2nd time zone.
- Page 2 DS Multi-8 BASICS DATE DISPLAY BACKLIGHT DISPLAY Use a function. Flat Press and Weekday, day, month, year hold for 2 secs Day, month, calendar week Use a function Day, month, seconds (in reverse order). The display backlight goes out after 10 seconds if no push-buttons are pressed.
- Page 3 DS Multi-8 T1 & T2 – 1st AND 2nd TIME ZONE ADD/SPLIT CHRONOGRAPH To set T1 or T2, the digital display must show T1 or T2 accordingly. T2 can only be adjusted A chronograph enabling times to be added and split times measured. The ADD and SPLIT by an hour and 15 minutes.
- Page 4 DS Multi-8 LAP CHRONOGRAPH TIMER A chronograph enabling lap times to be measured. Up to 20 lap times can be stored. ➀ ➁ ➂ Reset to ➀ ➁ ➂ ➃ ➄ programmed Display lap Restart period time (elapsed time Start...
- Page 5 DS Multi-8 ALARM A1 (T1) & A2 (T2) S E T 2 alarms are available. They are used and set in the same way. The following parameters must be set as required. am/pm DISPLAY SETTINGS ACTIVATION AND PARAMETER SELECTION ➁...
- Page 6 DS Multi-8 S ET S ET DATE HAND FORMAT FIRST CALENDAR WEEK OF THE YEAR ➆ ➃ First calendar week of the year: FULL = First full week of the year 1.1. = The week from 1.1. Press Date hand format: once 4.1.
- Page 7 We recommend that you have your watch checked every 3 to 4 years by your approved CERTINA® retailer or agent. For repair and servicing work, always contact an approved CERTINA® retailer or agent. This is the only way to benefit from the highest standards of Press Press service and ensure your watch guarantee remains in force.
Need help?
Do you have a question about the DS Multi-8 and is the answer not in the manual?
Questions and answers